• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

What i need-98 V6 stang v.s. 00 Integra GSR

  • Thread starter Thread starter mustangmatthew
  • Start date Start date Jun 24, 2005
  • 1
  • 2
Next
1 of 2 Next Last
M

mustangmatthew

Banned
May 4, 2005
19
0
0
cincinnati OH
Jun 24, 2005
#1
  • Jun 24, 2005
  • #1
Ok, here is whats going down. My friend and i have been arguing for that past couple of days about who would win in a race and what it would take to get there. I have a 98 V6 stang which is totally stock (except new 9mm wires which doesent help that mcha right now anyway). He has a 00 Integra GSR With the following mods: catback exaust, 4: 1 headers, jwt racing chip, vtec controller, cold air intake, iridium spark plugs, aluminum flywheel, short shifter, rear strut bar, front stut bar. I bought my car for $6,300 with 35,000 miles on it. He bought his car for $11,700 with all of the mods previously listed minus the plugs. He says that his car would run low 14's and would take a non-modded GT with ease. Is this true??? What would it take for my stang to keep up with him?? T know that my handeling will never be comparitive to his but other that. What would it take. When you answer, please please PLEASE tell me: 1) what mod 2) how much Hp gain should be expected 3) how it helps and finally 4) price. I would like to make my car as fast as hi is without spending more than he has. Also i think that i am better at driving a stick, and i KNOW i am an overall better driver. For all the stang fans out there, lemme know what it would take. Eventally i want to race him and steal his money ( on a track of course ) ,,,, but i want to make sure i can win. I can pretty much get close to free if not free labor so just include the parts price please. I know i asked alot here but i thank you for all your help in advance.
THANKS,
matt
 

98stangv8

Active Member
Oct 3, 2003
1,036
0
36
fayetteville, nc
Jun 24, 2005
#2
  • Jun 24, 2005
  • #2
mustangmatthew said:
Ok, here is whats going down. My friend and i have been arguing for that past couple of days about who would win in a race and what it would take to get there. I have a 98 V6 stang which is totally stock (except new 9mm wires which doesent help that mcha right now anyway). He has a 00 Integra GSR With the following mods: catback exaust, 4: 1 headers, jwt racing chip, vtec controller, cold air intake, iridium spark plugs, aluminum flywheel, short shifter, rear strut bar, front stut bar. I bought my car for $6,300 with 35,000 miles on it. He bought his car for $11,700 with all of the mods previously listed minus the plugs. He says that his car would run low 14's and would take a non-modded GT with ease. Is this true??? What would it take for my stang to keep up with him?? T know that my handeling will never be comparitive to his but other that. What would it take. When you answer, please please PLEASE tell me: 1) what mod 2) how much Hp gain should be expected 3) how it helps and finally 4) price. I would like to make my car as fast as hi is without spending more than he has. Also i think that i am better at driving a stick, and i KNOW i am an overall better driver. For all the stang fans out there, lemme know what it would take. Eventally i want to race him and steal his money ( on a track of course ) ,,,, but i want to make sure i can win. I can pretty much get close to free if not free labor so just include the parts price please. I know i asked alot here but i thank you for all your help in advance.
THANKS,
matt
Click to expand...


you would need a blower with a big shot of nitrous to keep you in the park...he would hang with a stock 98 gt..
 

Stangfanatic98

New Member
Mar 30, 2005
139
1
0
Woodbridge, VA
Jun 25, 2005
#3
  • Jun 25, 2005
  • #3
My (and your) 0-60 time stock is around 10 seconds, give or take a mili or so depending on the driver.. Your best modification would be a new car. My 98 handles brilliantly with stock suspension and only Geforce ZR 225/55 (if I remeber the sizing correctly) 16" tires. I've pushed it beyond its limits twice but was able to recover. Regardless, your handling will do you no good in a straight line. In my opinion, a stock OHV V6 in a 32-3300lb. car is just not enough. The only reason imports are quick (besides that v-tec -ivtec w/e bullhockey) are because they are this big | | and weigh nothing. Cheap labor + a bunch of plastic = matchbox. As much as we all slam them for looking/sounding like crap, at least the foreign companies realize the efficiency of the power to weight ratio, along with aggressive ignition and timing. So basically, I am in a sense defending 'rice' but I'm not saying I support it.

Moral of the story: Know your limitations. Swallow your pride. Kick his arse later when you have money to spend on a REAL car.
 
F

FunkMasterFlex

New Member
Sep 18, 2003
83
0
0
MD
Jun 25, 2005
#4
  • Jun 25, 2005
  • #4
IF he can drive it he should see mid 14's possibly low 14's?(help me out here integraholic). i knew a kid in HS last year who had a fairly new gsr(not sure what year), 5spd, full exhaust, shifter, intake. and he pulled a best time of 14.8 and hes a decent driver, never driven with him but i had seen him in the 15 sec range a few months before and he could hit 14.8s quite consistently now. your mustang will probably clock mid to low 16s(maybe more if its auto). your gonna need a good bit to beat him but if you have nearly 6 grand to spend(as to keep your price close to his) you should be able to pull it off. gonna need an 8.8 gt rear end and a beefed up tranny, a super/turbocharger for sure, components necessary to run the boost, chip, and a nice tune. youll probably also want true dual exhaust and gears and nice sticky tires. should be able to shut him down pretty well with all that, prices will vary and im not 100% sure thats all within your budget but it should be close.
 
K

kojack

New Member
Jun 27, 2005
63
0
0
Jun 27, 2005
#5
  • Jun 27, 2005
  • #5
You should be able to beat him if you get a blower, turbo or nos. I am getting a v6 stang vert. im putting all the saleen gear on it to make it look hot for this year.....then next I will find some power to drop under the hood.....blown v8 most likley. the integra gsr is a formidable car when tuned right. not ricer tuned but properly done...no fart cans or anything like that. I know..I used to own one. i am hooked on having a blue saleen kitted stang with polished 18" wheels and light bar. then work on it as time goes by, as long as when im driving down the road, most poeple can't tell the diff between a 281 and my car...I will be happy.

I just love the look of how that whole package is tied together. Call me a poser, or whatever....I dont really care...as long as the car turns heads. later on it will turn good times!
 

ZincPony

Member
Jun 15, 2005
84
0
6
Jun 27, 2005
#6
  • Jun 27, 2005
  • #6
theres no way he can beat a non moddem Gt. even with all his mods on the car.
 
S

Sims6986

New Member
Feb 26, 2004
50
0
0
Indy
Jun 27, 2005
#7
  • Jun 27, 2005
  • #7
he didn't say beat he said hang. And depending on the driver,(s) it is anybodies race. But your v6 against without a power adder will not stack up. I recently purchased a 2001 v-6 auto, and Supersixmotorsports.com can give you the most bang for your buck with their Powerpack.
 
M

mustangmatthew

Banned
May 4, 2005
19
0
0
cincinnati OH
Jun 27, 2005
#8
  • Jun 27, 2005
  • #8
Thanks for all the help guys. and i dodny say that i could take him now i said that i wanted to know what i would need. So here is what i am thinking: I will get an Exhaust- magna flow most likely, heades- any suggestions???, a short throw, 8.8 rear end, rimms and tires, suspenshion, chip, and a turbo / supercharger. On that what will be better for me in my situation, A Turbo or a supercharger??? What brand do you prefer?? Thanks Matt
 

Desert Stallion

Founding Member
Aug 5, 2001
651
0
16
Queen Creek, AZ
Jun 27, 2005
#9
  • Jun 27, 2005
  • #9
Forget the 8.8". You don't make enough power to need one, even with a blower. Besides, the 8.8" is heavier and requires more power to turn. Install shorter gears in the 7.5" and maybe a TracLok and call it good.

The key to the V6 Mustangs in terms of dropping times is to keep the weight off. If you're going to spend money on suspension stuffs, make some of it turn into tubular components like k-member and a-arms.

Wheels and tires won't do jack for you unless you're going to skinnies and slicks. You don't make enough power, and wider front wheels will only increase rolling resistance.

A blower or turbo is a good move, but pricey, and the stock single-port heads/intake will be a huge limiting factor. Doing a full-on HCI setup and then adding forced induction would be the only real way to go that route. There's always nitrous too, which is much cheaper than a blower and will add just as much power to the wheels.
 
F

FunkMasterFlex

New Member
Sep 18, 2003
83
0
0
MD
Jun 28, 2005
#10
  • Jun 28, 2005
  • #10
kojack said:
You should be able to beat him if you get a blower, turbo or nos. I am getting a v6 stang vert. im putting all the saleen gear on it to make it look hot for this year.....then next I will find some power to drop under the hood.....blown v8 most likley. the integra gsr is a formidable car when tuned right. not ricer tuned but properly done...no fart cans or anything like that. I know..I used to own one. i am hooked on having a blue saleen kitted stang with polished 18" wheels and light bar. then work on it as time goes by, as long as when im driving down the road, most poeple can't tell the diff between a 281 and my car...I will be happy.

I just love the look of how that whole package is tied together. Call me a poser, or whatever....I dont really care...as long as the car turns heads. later on it will turn good times!
Click to expand...

i highly HIGHLY do not recommend buying a v6 so that you can do a v8 swap. search a little on this site to figure out if you really want to go through with it, youll probably find that its a lot more of a headache than just going with a v8 in the first place. buy the v6 if u want a v6 and buy the v8 if u want a v8.

on another note i do recommend the 8.8 rear. on average our 7.5s(even with tlok) will likely crumble around 300tq. thats not saying it will happen but its pushing it, all you need is the right launch and bye bye mr 7.5. might die at 400tq, might die at 250, but u can always wait and see if it dies and then go for the 8.8 down the road. i also recommend looking into beefing up your tranny with g-force components or something from www.astroperformance.com , might have to call em up im not sure if the site is 100% done yet.
 
K

kojack

New Member
Jun 27, 2005
63
0
0
Jul 5, 2005
#11
  • Jul 5, 2005
  • #11
FunkMasterFlex said:
i highly HIGHLY do not recommend buying a v6 so that you can do a v8 swap. search a little on this site to figure out if you really want to go through with it, youll probably find that its a lot more of a headache than just going with a v8 in the first place. buy the v6 if u want a v6 and buy the v8 if u want a v8.

on another note i do recommend the 8.8 rear. on average our 7.5s(even with tlok) will likely crumble around 300tq. thats not saying it will happen but its pushing it, all you need is the right launch and bye bye mr 7.5. might die at 400tq, might die at 250, but u can always wait and see if it dies and then go for the 8.8 down the road. i also recommend looking into beefing up your tranny with g-force components or something from www.astroperformance.com , might have to call em up im not sure if the site is 100% done yet.
Click to expand...



I was looking around here somemore and saw a blower kit for the 6 that's like 3 g american, and bumps hp to 350 range with intercooler and a nice bump in torque, im going to do that I think. as long as she's pretty quick i dont care if it got a weed eater engine. Im thinkin 350 with the 6 should be plenty for me.....and still be pretty decent on gas. but like I said, as long as it looks the part im happy. I will be beefin up the rear end, suspension with lightweight parts and tranny upgrades too.

I think it would be cool to see a fast 6 around here..everyone has v8's....
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Jul 6, 2005
#12
  • Jul 6, 2005
  • #12
It would take alot of work, those Integras are quick and light.. Heres the ball-buster I guess.. My freind has a 98 V6 and I ..SMOKE.. it in my 4.0 Jeep.
 
K

kojack

New Member
Jun 27, 2005
63
0
0
Jul 6, 2005
#13
  • Jul 6, 2005
  • #13
you wont take a 99 up, esp if tuned good.
 
5

5spdBlack

New Member
May 25, 2005
44
0
0
NJ
Jul 7, 2005
#14
  • Jul 7, 2005
  • #14
mustangmatthew said:
He says that his car would run low 14's and would take a non-modded GT with ease. Is this true???
Click to expand...

No way he could take a stock GT...he is running around 14.7 if driven well with those mods. Stock GTs are good for low 14s

svtcobra R said:
he didn't say beat he said hang.
Click to expand...

no he said he could take a stock GT
 
K

kojack

New Member
Jun 27, 2005
63
0
0
Jul 7, 2005
#15
  • Jul 7, 2005
  • #15
yep....14.7 is generous with those mods.

low 14's hi 13's with mild boost.
 
5

5spdBlack

New Member
May 25, 2005
44
0
0
NJ
Jul 7, 2005
#16
  • Jul 7, 2005
  • #16
kojack said:
yep....14.7 is generous with those mods.

low 14's hi 13's with mild boost.
Click to expand...

Yea that was just a guesstimate...and the mild boost you speak of are you referring to a supercharged 6 cyl?
 
K

kojack

New Member
Jun 27, 2005
63
0
0
Jul 7, 2005
#17
  • Jul 7, 2005
  • #17
no I mean on the gsr jakson racing s/c or something like a greddy turbo kit. your only gettin in the mid to hi 13's with those.
 
N

NUTCASE

New Member
Mar 31, 2005
187
0
0
Jul 8, 2005
#18
  • Jul 8, 2005
  • #18
drag radials+any free mods+no2+powa shift that bitch=win
 
B

barthy00GT

New Member
Jul 2, 2004
76
0
0
Dickinson North Dakota
Jul 8, 2005
#19
  • Jul 8, 2005
  • #19
I know it would be unlikly for ya to do, but I was at a car show and some guy took a 97 v-6 and put in a 5.0 with a 4 barrel along with a 347 stroker with a very nice cam. I'd say 5.0 with about 347hp stock should toss that GSR around like it's going out of style. Plus if you get labor for free/ next to nothing do it up. Keep all the v-6 emblems. Little extream but you would show him good.

cheapest way of beating him would be 4.10s, chip, and drag radials. Gears are a good investment, but they are also going to cost ya if you do traveling because of high rpms. Personaly I'm putting in 3:73s and it should drop my car from about a 12.5 to an 11.88 (if I put on drag slicks).
buddy of mine with 5.0 went from 2:73's to 4.10 (with an auto) and that car destorys everything him comes up against now. His motor is stock with an intake and some trany work. Gears also only run about 180 bucks last I checked.
 

Desert Stallion

Founding Member
Aug 5, 2001
651
0
16
Queen Creek, AZ
Jul 8, 2005
#20
  • Jul 8, 2005
  • #20
Problem with the idea of a V8 swap is that some states are a lot pickier than others about emissions laws. I know that if someone pulled into a sniffer station here with a carb'd anything that was originally fuel injected, the station manager would laugh you out of the facility. Just ain't gonna happen.

Even if you can do a V8 swap and keep it fuel injected, then you would still have to pass the rollers, which you might be able to do but would be difficult.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

New to me 98 Cobra
  • bird_dog0347
  • Feb 25, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
26
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
FastDriver
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
522
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
Motor given to me and I’d like to rebuild it what do I need to do
  • Creomod
  • Dec 14, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
386
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 16, 2024
AeroCoupe
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
6K
Other Auto Tech Jul 28, 2024
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?