What Intake Gaskets Are You Using With Success

[7-UP BILL]

Doing HG's on my Fox and pulled out FP 90361's. They have been in since '94 and upon further research, they seem to be stockers. I have GT-40 intake with Edelbrock aluminums. I saw a Ford Racing set that was pricey, but the ports look huge. M-9439-A50. What gaskets are you using with success. I also run a S-Trim Vortech blower. Had no issues with the 90361's, but if there's something better... Thanks in advance.

 

[Bullitt347]

Fel Pro # 1262R. Used on AFR 220 Renegade heads. Been on the engine for 3 seasons holding 20+ psi and supporting 1,200 HP. Can not complain about that.

 

[mikestang63]

depending on your port size either 1250s or 1262s

 

[JD1964]

Been using 1250s with good results

 

[NIKwoaC]

My Fel-Pro 1262Rs lasted about 6 years before inexplicably disintegrating. I had custom Cometics made for the car (less than $30) after that. I'll let you know in 6 years if they outlived the Fel Pros.

 

[7-UP BILL]

I'm using Edelbrock heads. Need to find out port sizes