What Intake Manifold 2 get???

93stangTN · May 15, 2005

which ones are best?? i was thinkin the Edelbrock Performer II... any others thats better but not costly??? the motor is stock except for headers right now... iam goin to do a CAI, TB, before the Manifold though... is a 70mm TB the best to get probally??

Highbredcloud · May 15, 2005

if you're keeping the stock heads and cam...get either the stock lower ported, explorer intake, Cobra intake or the GT-40...all the rest are just too big for your combo...My 65mm TB works great on two of my 300RWHP + cars...

93stangTN · May 15, 2005

Ok, i was thinkin about the Cobra intake.. so if i got the upper & lower cobra intake it would be fine?

jb89coupe · May 15, 2005

I would either get your lower ported, or find a used Performer (not RPM or RPM 2). It's the only intake I've liked on the stock heads and it will support some serious aftermarket heads too if you plan on upgrading.

Nutzy19 · May 15, 2005

jb89coupe said:
I would either get your lower ported, or find a used Performer (not RPM or RPM 2). It's the only intake I've liked on the stock heads and it will support some serious aftermarket heads too if you plan on upgrading.

Just got my (older) Performer 5.0 on my car and I LOVE IT!!!!! True "seat of the pants" power increase with a mostly stock motor....Upgraded injectors too ( this is a must for drivability issues) 24 pounders

N8Miller · May 15, 2005

to hell with porting your stock intake. I am not a fan of that. i would either get the cobra, or my pick----the Performer intake.
IMO, the performer is a nice intake that you can use with some more performance mods.

Cobra intake on a budget.

Highbredcloud · May 15, 2005

N8Miller said:
to hell with porting your stock intake. I am not a fan of that. i would either get the cobra, or my pick----the Performer intake.
IMO, the performer is a nice intake that you can use with some more performance mods.

Cobra intake on a budget.

on a mostly stock car porting the stock lower benefits more than purchasing a $500 intake...new or used you are still spending more than you would if you had the lower ported...It's not worth spending all the money on a new intake just to gain 15HP...

90mustangGT · May 15, 2005

Highbredcloud said:
on a mostly stock car porting the stock lower benefits more than purchasing a $500 intake...new or used you are still spending more than you would if you had the lower ported...It's not worth spending all the money on a new intake just to gain 15HP...

I agree, on a stock headed, near stock car, a ported stock lower would be the way to go. I got the performer and really think that I would have been better off getting a TMOSS lower and spending the money elsewhere. Oh well, I have the performer and think maby I'll get the best of both worlds, a TMOSS ported Performer. He said it I would be looking at RPM II like flow.

5spd GT · May 15, 2005

Yep get the Performer (I have one with heads/cam)...or the Cobra would be fine as mentioned if your on a budget or go with the tmoss ported lower for a bit over $100 bucks I believe.

I think if your planning on going further into the motor like h/c upgrading the "whole" intake would be a good idea.

N8Miller · May 15, 2005

5spd GT said:
Yep get the Performer ...or the Cobra

holy ****nit, did we just agree on something?

oh, and the performer is WAY under $500.. probaby in the high 300s by now, or used cobra in the mid 200 range.

The Fox · May 15, 2005

I will sell you a performer intake for $50 if you don't mind switching to carburetion

Highbredcloud · May 15, 2005

N8Miller said:
holy ****nit, did we just agree on something?

oh, and the performer is WAY under $500.. probaby in the high 300s by now, or used cobra in the mid 200 range.

you're joking right? a new performer is $499.95...a new Cobra is $399.95 and if you want it polshed than you pay more...used...I got my used Performer for $300.00...I also have a Cobra that I wouldn't sell for less than $275...but than again we can argue all day on how much intakes are used...my point is that a stock ported lower will be more than enough to accomodate the stock heads...and all for under $150...The best intake for the money would have to be an Explorer since it flow as good at the Cobra/GT40 and when ported flows better than TFS or Performer...it all comes down to how deep your pockets are...

5spd GT · May 15, 2005

N8Miller said:
holy ****nit, did we just agree on something?

oh, and the performer is WAY under $500.. probaby in the high 300s by now, or used cobra in the mid 200 range.

I can agree with anybody at anytime...they just have to agree with me

The Performer is $500 from summit...

I still say if he is planning on more internal mods go ahead and upgrade the "whole" intake...

Highbredcloud - You got that car running yet?

Highbredcloud · May 15, 2005

5spd GT said:
I can agree with anybody at anytime...they just have to agree with me

The Performer is $500 from summit...

I still say if he is planning on more internal mods go ahead and upgrade the "whole" intake...

Highbredcloud - You got that car running yet?

Yeah...I got the notch running...and in all honesty...I'm not sure how I feel...I was expecting more low end from AFR combo than my GT-40X combo but it pulls hard from 3000-6000...the car is fast no doubt but so is the GT-40X combo...the only difference one is in a notch...the other in a GT vert...

Back to the topic...if the original poster will upgrade to better heads/cam than sure spend the extra money and get an intake...but if the rest of the mods will come further down the line or never...than its not worth the extra money...the stock ported intake will do just as well...just my thought...

v8only · May 15, 2005

a $500 intake on a stock headed 5.0 is a complete waste of cash, unless you've already done all the other mods, meaning gears, rear control arms, and the usual bolt ons, THEN you do the intake, then heads as money permits. If you haven't done the gears and control arms, you're throwing your money away. You may gain a tenth or two from an intake swap, but a gear and control arm swap is gonna get you closer to a full half second. Those e7's can't flow enough for a lot of intake. I agree with most of the others, in the fact that if you've got to do it, port the stock lower.

93stangTN · May 16, 2005

are u all talkin about the "performer" or the "performer RPM II" ???? which ever, where's the best place to get it???

also, talkin about gears too, where should i buy them from?? thats my first purchase

tmoss · May 16, 2005

If you would like to see some results from porting intakes of all kinds - go to my website and look at the threads on "results" in the "community" section of my website.

5spd GT · May 16, 2005

v8only said:
a $500 intake on a stock headed 5.0 is a complete waste of cash, unless you've already done all the other mods, meaning gears, rear control arms, and the usual bolt ons, THEN you do the intake, then heads as money permits. If you haven't done the gears and control arms, you're throwing your money away. You may gain a tenth or two from an intake swap, but a gear and control arm swap is gonna get you closer to a full half second. Those e7's can't flow enough for a lot of intake. I agree with most of the others, in the fact that if you've got to do it, port the stock lower.

Well you could also look at it like doing the usual bolt-ons, gears, control arms?, after the intake because the intake is being restricted by those "stock" parts...it can go either way. I do not think a intake like the Performer/Cobra/Tmoss porting is a waste of cash at all...

The intake will give you a bit more power. The control arms/gears don't...just get you that quicker E.T. Gears are a great mod none the less.

A performer isn't a lot of intake for the stock e7's...that is why were not mentioning the Systemax/RPM II/TFSR/etc...

93stangTN - Summitracing is a great place to order. Shipping is free and they will price match.

They make the Performer, Performer RPM, and Performer RPM II (they are bigger as they go. You will want the regular Performer. The other intakes are better for stroked cars and blown cars.

What Intake Manifold 2 get???

93stangTN

New Member

Highbredcloud

Active Member

93stangTN

New Member

jb89coupe

New Member

Nutzy19

Member

N8Miller

I need NOS....make it 2 of the big ones

Highbredcloud

Active Member

90mustangGT

I felt sorry for girls because

5spd GT

"the 5.0 owns all"

N8Miller

I need NOS....make it 2 of the big ones

The Fox

New Member

Highbredcloud

Active Member

5spd GT

"the 5.0 owns all"

Highbredcloud

Active Member

v8only

Active Member

93stangTN

New Member

tmoss

Gettin Wired

5spd GT

"the 5.0 owns all"

Similar threads

What Intake Manifold 2 get???

New Member

Active Member

New Member

New Member

Member

I need NOS....make it 2 of the big ones

Active Member

I felt sorry for girls because

"the 5.0 owns all"

I need NOS....make it 2 of the big ones

New Member

Active Member

"the 5.0 owns all"

Active Member

Active Member

New Member

Gettin Wired

"the 5.0 owns all"

Similar threads

Privacy & Transparency

Privacy & Transparency