What is she Capable of?

Here is what is being put together for my 89lx convertible. What kind of horsepower and torque do you think this is capable of? Anyone with something similar? What about 1/4mile on street tires? Any good information or suggestions is much appreciated.

ENGINE

-Stock 302 block bored .030" = 306cid. , Deck milled .010-.020 and painted gloss black
-JE forged flat top pistons w/ machined valve reliefs
-Summit Piston Rings
-Balanced crankshaft
-I beam connecting rods
-Edelbrock performer cylinder heads
-170cc intake ports
-60cc combustion Chambers
-2.02" intake valves
-1.60" exhaust valves
-1.460" valve springs
-.575" max lift
-Fel-Pro Head Gaskets
-Ford Racing Hydraulic Roller Lifters
-Lunati "Blue Racer" hydraulic roller camshaft
-advertised duration
IN/EX 285/291
-duration @ .050"
IN/EX 221/232
-Gross valve lift .526"/.523" w/ 1.6 roller
rockers
-.557"/.554" with 1.7 roller rockers
-1.7 pedestal mount roller rockers
-Hardened push rods
-Ford Racing Oil Pan Kit, water pump, oil pump, pickup, harmonic balancer
-Summit Billet Double Roller Timing Set
-BBK underdrive pulleys
-ARP Rod bolts, head bolts, intake manifold bolts
-Prothane Motor Mounts
-Smog Pump Eliminator Kit

EXHAUST

-Mac cat back exhaust w/ 3" stainless tips
-BBK ceramic 1 5/8" shorty headers
-Pypes off road x-pipe

INDUCTION

-Edelbrock Performer RPM II Intake Manifold
-Edelbrock 75mm Throttlebody
-Summit 75mm MAF Sensor
-Edelbrock 75mm EGR Spacer
-Fel-Pro intake gaskets
-BBK Fenderwell Intake

IGNITION

-MSD 6AL Ignition Box
-MSD Coil
-MSD distributor cap and rotor
-MSD 8.5mm wires

FUEL DELIVERY

-Ford Racing 24lb injectors
-Ford Racing 190lph fuel pump
-Holley Fuel pressure regulator

DRIVETRAIN

-BUILT AOD w/ new bands, seals, valvebody
-TCI Streetfighter 3000rpm stall lockup torque converter
-B&M "transpak" shift kit
-Ford Racing 3:73.1 Ring and Pinion gear set
-Ford Racing Aluminum driveshaft
-Prothane Transmission Mount

COOLING

-Afco 3 core radiator