• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What is the difference between E5 and E7 heads

  • Thread starter Thread starter stevesLX
  • Start date Start date Jun 22, 2007

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Jun 22, 2007
#1
  • Jun 22, 2007
  • #1
I have a block here and when I pulled the heads off the block there are differen't casting #'s on each one of them says E5TE and the other says E7TE. What is the difference here?
 
D

Deleted member 87397

Jun 22, 2007
#2
  • Jun 22, 2007
  • #2
E5 is 1985 casting and E7 is 1987 casting. Don't know if there's much of a difference between the two, but the E7's could have been improved over the E5's a bit after Ford botched the E6 fast burn heads. I'm not sure if after 86 they went back to the original casting or made improvements to them, but they shouldn't be much different if any.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jun 22, 2007
#3
  • Jun 22, 2007
  • #3
If memory serves (and it's been a while since I dabbled in the OHV stuff) the E5TE was the earlier casting before the E7TE was made popular. They're essentially the same heads, although I have heard that the E5's used a slightly larger 69cc combustion chamber, compared to the E7's where run anywhere from 60cc-63cc.

Otherwise, they've got the same chambers design and both heads utilize the 1.78(I) and 1.46(E) valves.

Also, after doing a little searching, it also appears that the thermactor bump in the E5 heads is a little larger and more obtrusive to exhaust flow as well, which would prove more restrictive unless ported.

Not a bad choice on a budget really if you're upgrading the heads on an early EFI Mustang, but you'll want to have them ported and milled for them to be of any use to you.


Exhaust port on the E7TE



Exhaust port of the E5TE

 

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Jun 22, 2007
#4
  • Jun 22, 2007
  • #4
well let me ask this, does anyone know if a set of GT40P's will work with BBK chrome long tube headers. part # 129-1516 in Jegs.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jun 22, 2007
#5
  • Jun 22, 2007
  • #5
GT40P's will probably run you into problems with the location of the spark plug in refference to the BBK headers.
 

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Jun 22, 2007
#6
  • Jun 22, 2007
  • #6
Well here's my dilemma I am broke and need some heads and I got the heads I referenced before the E5 and a E7. I just dont know what to do.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jun 22, 2007
#7
  • Jun 22, 2007
  • #7
Looking in your profile, it says you're already driving an '89 LX....in which case, you've already got the E7TE's on your car.....so why would you switch them out for another set?
 

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Jun 22, 2007
#8
  • Jun 22, 2007
  • #8
The ones I have have issues and are junk. I need another set and the sooner the better. I would love to get a good performance set of heads but unfortunately I dont have the money for that right now so I basically need something to get me by but yet isn't going to cause me headaches like what I have now.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jun 22, 2007
#9
  • Jun 22, 2007
  • #9
i think there are people on this forum running either the mac or BBK LT's with P heads. Your other alternative is to find original Gt-40's from either a cobra, lightning, or 95-96 5.0 explorer. do a little searching, there's a ton of info about the P head spark plug issue! good luck
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
525
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Cooling Jacket Pitting Idea's?
  • BoostedRed89gt
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
363
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Mustang5L5
6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
326
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?