I have a block here and when I pulled the heads off the block there are differen't casting #'s on each one of them says E5TE and the other says E7TE. What is the difference here?
E5 is 1985 casting and E7 is 1987 casting. Don't know if there's much of a difference between the two, but the E7's could have been improved over the E5's a bit after Ford botched the E6 fast burn heads. I'm not sure if after 86 they went back to the original casting or made improvements to them, but they shouldn't be much different if any.
If memory serves (and it's been a while since I dabbled in the OHV stuff) the E5TE was the earlier casting before the E7TE was made popular. They're essentially the same heads, although I have heard that the E5's used a slightly larger 69cc combustion chamber, compared to the E7's where run anywhere from 60cc-63cc.
Otherwise, they've got the same chambers design and both heads utilize the 1.78(I) and 1.46(E) valves.
Also, after doing a little searching, it also appears that the thermactor bump in the E5 heads is a little larger and more obtrusive to exhaust flow as well, which would prove more restrictive unless ported.
Not a bad choice on a budget really if you're upgrading the heads on an early EFI Mustang, but you'll want to have them ported and milled for them to be of any use to you.
Looking in your profile, it says you're already driving an '89 LX....in which case, you've already got the E7TE's on your car.....so why would you switch them out for another set?
The ones I have have issues and are junk. I need another set and the sooner the better. I would love to get a good performance set of heads but unfortunately I dont have the money for that right now so I basically need something to get me by but yet isn't going to cause me headaches like what I have now.
i think there are people on this forum running either the mac or BBK LT's with P heads. Your other alternative is to find original Gt-40's from either a cobra, lightning, or 95-96 5.0 explorer. do a little searching, there's a ton of info about the P head spark plug issue! good luck