What kind of maf is this? Pics!!!

Black1987Stang

Active Member

Aug 22, 2004

1,422

0

37

39

Jersey Shore

Jan 11, 2006

#1

• Jan 11, 2006

• #1

http://www.geocities.com/nd4sjunky20/MUSTANG4.JPG

The top of it is a Pro-M but ive never seen that casing before. BTW this is my friends car and were trying to forget out what kind it is, he said its from a supercharger Maybe a blow throw

http://www.geocities.com/nd4sjunky20/MUSTANG3.JPG

http://www.geocities.com/nd4sjunky20/MUSTANG7.JPG

a pic of his homemade air deflector thingy, he noticed a big difference with it like this
http://www.geocities.com/nd4sjunky20/EngineBay.JPG


an outside shot

http://www.geocities.com/nd4sjunky20/FORDPwr.JPG

 

Maryland Stang

Active Member

Aug 21, 2002

1,656

30

39

68

Greenville, NC

Jan 11, 2006

#2

• Jan 11, 2006

• #2

87stangdiddle said:

a pic of his homemade air deflector...//www.geocities.com/nd4sjunky20/EngineBay.JPG

Click to expand...

Hey, it looks like a piece of cardboard blew up on the engine while you were taking the picture. Can you get a shot of the deflector without the cardboard?

 

Rick 91GT

Mustang Master

Nov 29, 1999

9,692

95

99

49

PA

www.rnhperformance.com

Jan 11, 2006

#3

• Jan 11, 2006

• #3

That is a Pro-M 77mm Cast Alum meter...

You may be able to contact Proffessional Mass Air and they can tell you exactly what that was calibrated for since it appears some one scratched it out.

 

DemonGT

Founding Member

May 24, 2002

871

51

49

Sparta,WI

Jan 11, 2006

#4

• Jan 11, 2006

• #4

is that card board over the filter? your buddy will notice a even bigger difference when the engine compartments on fire

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Jan 11, 2006

#5

• Jan 11, 2006

• #5

Tell your buddy to get a 3 in Anderson Power Pipe and put that thing out in the fenderwell if he's going to use it. The card board thing is about as ghetto as the Altezas. That meter is not a blow through by the way. That's an older style housing and unless the electronics have been swapped into it from another housing then it's a N/A meter. Blow through's are designed to be installed between the blower and the intake. That housing is not designed for that.

Edit: BTW... the link for the new Pro-M is in my sig. It will cost your buddy $100 plus shipping to get it flow bench tested to find out how it's calibrated.

 

8

89white50

Member

Nov 16, 2004

440

1

18

43

central MA

Jan 11, 2006

#6

• Jan 11, 2006

• #6

BWaahhhaa...cardboard. how has that actually stayed in place?

 

Black1987Stang

Active Member

Aug 22, 2004

1,422

0

37

39

Jersey Shore

Jan 11, 2006

#7

• Jan 11, 2006

• #7

Daggar said:

Tell your buddy to get a 3 in Anderson Power Pipe and put that thing out in the fenderwell if he's going to use it. The card board thing is about as ghetto as the Altezas. That meter is not a blow through by the way. That's an older style housing and unless the electronics have been swapped into it from another housing then it's a N/A meter. Blow through's are designed to be installed between the blower and the intake. That housing is not designed for that.

Edit: BTW... the link for the new Pro-M is in my sig. It will cost your buddy $100 plus shipping to get it flow bench tested to find out how it's calibrated.

Click to expand...

He only did the cardboard thing to see if he was getting any fan wash into the meter or anything.

Seems like the Power Pipe is the only way to get the filter or maf in the fender since the filter is like bolted on to the maf...unless u made a flange and made all the parts urself. Its calibrated for 24lb injectors which he has, is this the same as a n/a pro-m maf like they sell these days but just old school? or was it made for some other purpose?

 

04sleeper

Founding Member

Jun 22, 2002

2,674

14

89

Dallas, TX

www.cardomain.com

Jan 11, 2006

#8

• Jan 11, 2006

• #8

It is the same as the newer ones and should work just fine.

It is a metal casting like mentioned before.

I had one on my 88 GT back in 96, although I think I came up with a little better sheild. lol...