• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What size tires for my ponies?

  • Thread starter Thread starter clinttaft
  • Start date Start date Mar 6, 2004
C

clinttaft

New Member
Mar 6, 2004
4
0
0
Mar 6, 2004
#1
  • Mar 6, 2004
  • #1
I have an 89 SSP LX. The ponies are 16's and the 89 does not have the folded fenders like the 90 and up. Any ideas on what size 16 tire I can use. I'd like some meaty looking tires. Any input is greatly appreciated.
 
4

4eyed5.0

Member
Mar 4, 2004
33
0
6
VA
Mar 6, 2004
#2
  • Mar 6, 2004
  • #2
I have an 86 lx, i used to have ponies with 255 50 16 tires and they were really mean looking. The front tires rubbed whenever the steering wheel was turned all the way in either direction though.
 

Greenracing

Founding Member
Nov 13, 2000
109
0
0
Puerto Rico
Mar 6, 2004
#3
  • Mar 6, 2004
  • #3
225 front, 255 back.
 
9

92BlackGT

Member
Aug 4, 2003
182
7
17
Tinker AFB, OK
Mar 6, 2004
#4
  • Mar 6, 2004
  • #4
my bro had 255's all around on his '89 gt vert with no problems
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
Mar 7, 2004
#5
  • Mar 7, 2004
  • #5
I think that fat of a tire on the front would just look stupid. Go with a 225/50/16 or a 225/55/16 on the front.
 

NeQX

Founding Member
Sep 30, 2002
904
0
0
Infront Of You, NY
Mar 7, 2004
#6
  • Mar 7, 2004
  • #6
ok, pony rims is what I got and I got a good setup...

BFG 255/50/16's on back

Dunlop SP5000's 225/50/16 on front

basically 255 is biggest you can get on back, might get a lil quad shock rubbing but remove those POS quads! and 225 on front is nice, I usually run 40psi up front, 35 in back on street. Hope this helps!

 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Mar 7, 2004
#7
  • Mar 7, 2004
  • #7
If the look is all you're after, then put on the size you want - watch out for tires coming in contact with the metal bits. However, if you're actually looking for performance increase, you may come up with a different answer. A certain width wheel is needed to take advantage of wider tires. It's necessary to spread the tire and keep all the tread flat on the road surface. Mounting a 255 tire on a 7" or 7.5" wheel is possible - but it's doubtful that you're getting signficantly better performance because the wheel is too narrow to properly support that tire. A good rule of thumb is to keep the section width of the tire (the 225 or 255 number) no more than 2" wider than the wheel width. The section number is in millimeters, so divide it by 25.4 to convert to inches. You can see that a 255 tire's section width is a little over 10" -- subtract 2" - you need at least an 8" wide wheel to support that tire; 8.5" or 9" would be better. Additionally, the 255 tire is heavier than the 225; it takes more power to rotate a heavier wheel/tire. Once traction has been achieved - the car will accelerate and stop slightly less effectively with the heavier wheel/tire package.

If performance is what you're after - focus on getting a really sticky 225 tire for your stock rims. The racers out there can tell you what works. If you want to use the bigger tire, get a wider wheel to go with it, and keep the package as light as you can for best performance. If the look of a bigger tire on your stock rim is what you're after - slap the 255's on there. Just know that they may actually hurt the car's overall performance.
 

houstonstangguy

Founding Member
Mar 16, 2002
979
0
0
Houston, Texas
Mar 7, 2004
#8
  • Mar 7, 2004
  • #8
look around and see what you like before you make the mistake of buying and then deciding you dont like.

i have 245/50/16 yokohomas all around, and an extra set of 245/50/16 nitto 555r's for the back.

I tried the 225 in the front and 245 in the back and i didnt like it at all, plus if you stagger sizes dont forget you wont be able to rotate, nor want to.

IMO if you dont have skinnies in the front then you should do the same size all around. just my opinion though.
 
You must log in or register to reply here.

Similar threads

G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
109
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 7:13 PM
Qtrhrse23
Q
Wheels-Tires Factory white ponys, anyone know a color match paint for them?
  • rednotch
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
284
Fox 5.0 Mustang Tech Apr 27, 2026
rednotch
Wheel backspacing
  • Brad Hanks
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
510
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2025
Brad Hanks
305-45-17 tires on Pony wheels (17")?
  • TTSaleen
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
494
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 1, 2026
limp
B
Tire size question 1986 gt hatchback
  • B0udreaux
  • Jan 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
591
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 17, 2026
B0udreaux
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?