What Smog Pump Pulley.

Bens95cobra8594 · Jan 18, 2007

All -

Searched but was unable to find information about which brand of smog pump delete bracket to purchase.

Found some on eBay, but not sure of the quality. UPC was the only brand name I found.

Where did y'all (that have 'em) get 'em? And had good or bad to say about each brand?

Thanks as always!

Suspect · Jan 18, 2007

is this what ur looking for?

http://www.gefracing.com/Merchant2/...&Product_Code=M8604A50&Category_Code=50ENGINE
http://store.summitracing.com/partd...924760+4294925232+4294923430+115&autoview=sku

i just picked up an ac delete from geford today.
http://i4.photobucket.com/albums/y118/kidala630/ac.jpg

Bens95cobra8594 · Jan 18, 2007

Suspect said:
is this what ur looking for?

http://www.gefracing.com/Merchant2/...&Product_Code=M8604A50&Category_Code=50ENGINE
http://store.summitracing.com/partd...924760+4294925232+4294923430+115&autoview=sku

i just picked up an ac delete from geford today.
http://i4.photobucket.com/albums/y118/kidala630/ac.jpg

Yeah, exactly what I am looking for, just not sure of the quality of any of the parts... geford looks like decent quality though, beefy enough.

Anyother opinions out there?

vp6799 · Jan 18, 2007

Why not run a shorter belt??

urban96 · Jan 18, 2007

http://www.uprproducts.com/shopping/shopexd.asp?id=194

Bens95cobra8594 · Jan 18, 2007

vp6799 said:
Why not run a shorter belt??

From what I found in the search section, the tensioner becomes an issue running a shorter belt. Plus I still have a/c to contend with.

I suppose running a shorter belt would bypass the entire thing, but want to make sure it's the correct length... from what I found 84.5" seems to be the winner when still running a/c but no smog pump. But that was also on 93 and prior 5.0Ls listed in the search section.

Any other help is always appreciated!

turbogt · Jan 18, 2007

I don't like my UPR piece... Alignment sucked.. Took alot of work to get it right...

I do have a Vortech too, which complicates things a little.

HISSIN50 · Jan 18, 2007

I think I've read that Steeda sells one for 94-95's specifically (no clearancing needed from what I think I recall) and folks have liked it.

Take that for what you will - we have strict smog testing here so I cant entertain items like that (so I don't pay the threads much mind).

Good luck.

Bosko5.0 · Jan 18, 2007

90" belt for me no smog have every thing else including ac but the 90" is a tight fit youll need to have someone hold down the tensioner while you put the belt on

Bens95cobra8594 · Jan 19, 2007

turbogt said:
I don't like my UPR piece... Alignment sucked.. Took alot of work to get it right...

I do have a Vortech too, which complicates things a little.

Okay, so that's one less I can contemplate purchasing...

(thanks for the information)

RFMustangGT · Jan 19, 2007

I ordered mine from summit and had no problems putting it in and have had no problems since putting it on. pretty nice part.

vp6799 · Jan 19, 2007

Bens95cobra8594 said:
From what I found in the search section, the tensioner becomes an issue running a shorter belt. Plus I still have a/c to contend with.

I suppose running a shorter belt would bypass the entire thing, but want to make sure it's the correct length... from what I found 84.5" seems to be the winner when still running a/c but no smog pump. But that was also on 93 and prior 5.0Ls listed in the search section.

Any other help is always appreciated!

I just run a shorter belt. There's no issue's with the tensioner for me?? At the same time, I installed a set of MAC underdrive pullies.

To get the right belt size, Just cut the old belt. Have a buddy hold the tensioner out all the way while you run the cut belt through the system. When you get back to your starting point, just mark it and measure it to get you belt length.

Worked perfect for me. I have no issue's with anything.

bimmertech · Jan 19, 2007

vp6799 said:
I just run a shorter belt. There's no issue's with the tensioner for me?? At the same time, I installed a set of MAC underdrive pullies.

To get the right belt size, Just cut the old belt. Have a buddy hold the tensioner out all the way while you run the cut belt through the system. When you get back to your starting point, just mark it and measure it to get you belt length.

Worked perfect for me. I have no issue's with anything.

:Word:

69clark · Jan 19, 2007

I bought mine from UPR. I had to use spacers with it but I just figured that was because I had to bolt it to a supercharger bracket rather than a stock bracket.

urban96 · Jan 19, 2007

i think mines the old style UPR. its all alum but its solid and not drilled/machined out like the new one. i did have to grind out that little notch to clear the inside part of the bracket but it took ~5 mins with a dremel

What Smog Pump Pulley.

Bens95cobra8594

New Member

Suspect

Active Member

Bens95cobra8594

New Member

vp6799

New Member

urban96

bubb rubb says:"woo woooooo"

Bens95cobra8594

New Member

turbogt

Member

HISSIN50

"How long does it take to get help in here?

Bosko5.0

Active Member

Bens95cobra8594

New Member

RFMustangGT

Member

vp6799

New Member

bimmertech

New Member

69clark

urban96

bubb rubb says:"woo woooooo"

Similar threads

What Smog Pump Pulley.

New Member

Active Member

New Member

New Member

bubb rubb says:"woo woooooo"

New Member

Member

"How long does it take to get help in here?

Active Member

New Member

Member

New Member

New Member

bubb rubb says:"woo woooooo"

Similar threads

Privacy & Transparency

Privacy & Transparency