I'm wanting to get a cam package from rpm-mustang for my 2000 mustang but i dont know what lift springs i need the 500 or 535. Also does n e body have a ballpark figure on how much it would cost to have a ship install it? Last but not least does n e body know of a good shop in Florida?
Talk to Mik at rpm when you order your cam, he will tell you what springs are needed when you pick out your cam. It all depends on the lift of the cam you get.
Talk to Mik at rpm when you order your cam, he will tell you what springs are needed when you pick out your cam. It all depends on the lift of the cam you get.
The springs you need depend on the lift of the cam you get. The 207 cam is the only one there with lifts under 0.500". You'd probably be okay with this on your stock springs, though I'd still be tempted to get new ones (and I think Mik would tell you the same thing). In that case, the 0.500" springs would be sufficient. Any cam beyond the 207 has well over 0.500" lift .. some up to 0.530"+. You'd obviously want the 0.535" springs for that.