What's a good 1.7 stud mount rocker?

Nobody · Aug 5, 2005

I don't know rocker arms at all. I was hoping some people could point me in the right direction for a decent set. As the title says, I am looking for 1.7 stud mount.

Thanks,
Gabe

bjl95mustang · Aug 5, 2005

Whats your price range?

Nobody · Aug 5, 2005

I guess something like $200-250. Would that price buy junk?

final5-0 · Aug 5, 2005

I've been very happy with my Scorpions.

btw, if you are gonna go with a cam later, you might wanna consider 1.6's.

Later
Grady

bjl95mustang · Aug 5, 2005

I got a set of trick flow rockers and they look pretty good. Look into those and comp cams and crane cams rockers.

igotyofire · Aug 5, 2005

assembled heads dont come with rockers?

bjl95mustang · Aug 5, 2005

igotyofire said:
assembled heads dont come with rockers?

That ushally means they come with the valves and springs installed. But I have never seen heads come with rockers unless it's some kind of special deal.

igotyofire · Aug 5, 2005

bjl95mustang said:
That ushally means they come with the valves and springs installed. But I have never seen heads come with rockers unless it's some kind of special deal.

wow so if i do get heads i should get pedstal afr so i can reuse my stock 1.7 cobra rockers. wow this isn't cheap,heh

igotyofire · Aug 5, 2005

final5-0 said:
I've been very happy with my Scorpions.

btw, if you are gonna go with a cam later, you might wanna consider 1.6's.

Later
Grady

he can still get a cam with 1.7 rockers

bjl95mustang · Aug 5, 2005

It also depends on your spring pressure. The ped bolts are pretty small and if you have a decent amount of spring pressure you can snap them right off. But you can sell your 1.7rr for about $100 and then get some others so your really only out $130 or so.

igotyofire · Aug 5, 2005

is there a limit for spring pressure on the pedastal setups? this would inquire a smaller cam i suppose, but i would thing most cams around a TFS 1, steeda 19, 2031 would be okay anyways

final5-0 · Aug 5, 2005

igotyofire said:
he can still get a cam with 1.7 rockers

You are more limited in cam choice with the 1.7 ratio but yes, you are correct in what your saying.

I shoulda been a bit more clear with my info I reckon.

Later
Grady

VibrantRedGT · Aug 5, 2005

Scorpion, Probe, TFS, Crane, Comp are all good. The Crane Cobra 1.7's are noisey from what I've heard. So are shaft mount rockers.

final5-0 · Aug 5, 2005

igotyofire said:
wow so if i do get heads i should get pedstal afr so i can reuse my stock 1.7 cobra rockers. wow this isn't cheap,heh

Paul (Killercanary)gave some very good info about his experiences with ped rockers about 4 or 5 days ago.

My opinion is that you should sell the 1.7 peds and go with AFR's setup for stud mount.

Later
Grady

88GT460 · Aug 5, 2005

i just ordered some crane 1.7 rr pedestal mount until i can afford the heads/cam/intake

What's a good 1.7 stud mount rocker?

Nobody

bjl95mustang

Nobody

final5-0

Mustang Master

bjl95mustang

igotyofire

Member

bjl95mustang

igotyofire

Member

igotyofire

Member

bjl95mustang

igotyofire

Member

final5-0

Mustang Master

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

final5-0

Mustang Master

88GT460

New Member

Similar threads

What's a good 1.7 stud mount rocker?

Mustang Master

Member

Member

Member

Member

Mustang Master

"STANGNET'S PENGUIN SMACKER"

Mustang Master

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency