• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

What's everyones winter projects?

  • Thread starter Thread starter cobra dave
  • Start date Start date Dec 15, 2004
  • 1
  • 2
Next
1 of 2 Next Last

cobra dave

New Member
Sep 1, 2003
308
0
0
47
Dec 15, 2004
#1
  • Dec 15, 2004
  • #1
Winter sux plain and simple especially when you get lake effect snow every other day but, i guess it gives us time to dig in and do some knuckle bustin. So whats everyone got going on this year?
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
stangnet.cardomain.com
Dec 15, 2004
#2
  • Dec 15, 2004
  • #2
Got to replace the ABS unit(no biggie, got one for dirt cheap....ever priced one of these things from Ford WOW! Nearly $2800 and discontinued, i paid $75), put the exhaust on i've had laying around for about a month now. Clean the engine bay up a little, might as well pull the engine and clean it up to and replace a slightly leaking rear main. While thats out, might order up the c/c plates,coilovers, struts and redo the rear suspension too. Then possibly work in the S trim somewhere. Thats usually how my winters snowball..i can't leave well enough alone. I've gone way, way over board on my other past cars during the winter months.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Dec 15, 2004
#3
  • Dec 15, 2004
  • #3
Looks like i'm gonna do another FTI cam (more aggressive) and a holley systemax II intake. I'll probably change a bunch of the sensors too while i'm there. Might go back to n2o again as well Also looking for an AFM PMS.
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Dec 15, 2004
#4
  • Dec 15, 2004
  • #4
My winter project: Watch Grn92LX make up his mind about what he's going to do to his car. This could last through winter and into the spring time.

Joe
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
49
st.louis mo 314
Dec 15, 2004
#5
  • Dec 15, 2004
  • #5
I think my project is done just in time for winter . I just need to get some good long datalogs to get it tuned proper and go to a dyno for some WOT n2o tuning. Need to get my cobra bumper painted and plates re-newed.

I would like to get the friggan N.O.S. bottle warmer hooked up as well as the SSM lift bars installed but I am going to wait for new springs/shocks (looking at the bullit kit) as to do it at the same time before I go installing and then turn around and change half the stuff.
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Dec 15, 2004
#6
  • Dec 15, 2004
  • #6
um ... getting it through inspection and registered so i can keep driving it to work every day without worrying.

maybe i'll get the 80mm maf and 70mm t/b installed some day ...
 

greenlantern

Member
Jul 11, 2004
265
1
17
54
St Louis Mo
Dec 15, 2004
#7
  • Dec 15, 2004
  • #7
I gotta figure out how Im gonna heat this garage. I wanna stay away from the kerosene. Electric dosen't do enough so it looks like propane. My next project will be long tube headers and maybe some upper and lower control arms.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Dec 15, 2004
#8
  • Dec 15, 2004
  • #8
a new 302 engine build up from a explorer, and a lot of clean up on my car
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
42
WPG/MB/CA
Dec 15, 2004
#9
  • Dec 15, 2004
  • #9
greenlantern said:
I gotta figure out how Im gonna heat this garage. I wanna stay away from the kerosene. Electric dosen't do enough so it looks like propane. My next project will be long tube headers and maybe some upper and lower control arms.
Click to expand...

i was in the same boat as you, then i broke down and decided to spend the cash to warm up the garage. i bought one of these , 30 000 to 80 000 BTU and when it was -20 C out the other day i wanted to see how warm i could get it, and i got it to +15 C in about an hour and a bit, with a door open to let some fresh air in, my garage isn't insulated at all either,


ont o my project for the winter, i plan to drop this bad boy in click here to see more pics and info
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Dec 15, 2004
#10
  • Dec 15, 2004
  • #10
greenlantern said:
I gotta figure out how Im gonna heat this garage. I wanna stay away from the kerosene. Electric dosen't do enough so it looks like propane. My next project will be long tube headers and maybe some upper and lower control arms.
Click to expand...

we have free natural gas So we keep our garage heated nicely.
 

1105

I AM the random post master...bow down
May 3, 2003
3,841
0
0
Daytona Bch, FL
Dec 15, 2004
#11
  • Dec 15, 2004
  • #11
Finishing up my engine bay... I would have had the pass side all done last night, but I ran out of sand paper Other than that, going to work on painting my car.

 

pleasehelp

New Member
Mar 11, 2003
686
0
0
44
Poplar Grove, Il
Dec 16, 2004
#12
  • Dec 16, 2004
  • #12
Installing the following:
TFS engine kit(TW heads, stage 1 cam, street heat intake, timing chain)
Mac Longtube headers
Mac Prochamber
Kirban fuel pressure regulator
BBK fuel pressure gauge
Deleting smog and egr
Switching to Fox TB setup(75mm accufab TB, egr delete plate, fox tb cable and bracket, CAI)
TKO trans
aluminum driveshaft
driveshaft safety loop
steeda tri ax shifter
new clutch
.........all of I think of for now. Going to feel like a different car from the stock form it is now. Can't wait for next summer!
 

Gibbo97

Founding Member
Apr 20, 2001
92
0
7
55
Macon, GA
Dec 16, 2004
#13
  • Dec 16, 2004
  • #13
Hmmmmmmm, let's see....

1) Install new DSS 331 longblock assembly with ALL new parts, right down to the ARP bolts.
View attachment 519493

2) Install Vortech V2-SQ supercharger kit.
View attachment 519495

3) Install Tremec T-56 transmission.



4) redo interior: changing from a stock black/tan interior to all black, new carpet, dying interior pieces, installing a rear seat delete kit, reinstalling corbeau CR-1 seats.
<img src="http://img.photobucket.com/albums/v350/Gibbo97/phonepix2004.jpg" width=960 height=720>

5) complete repaint of exterior - House of Kolor Shimerin Kandy Basecoat Cobalt Blue.


6) Put in new air freshener.
 
X

xYoung347x

New Member
Nov 3, 2003
382
0
0
Dec 16, 2004
#14
  • Dec 16, 2004
  • #14
Gotta change a head gasket, tune up, and try to get my lazy butt in the cold ass garage.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
49
MAINE
Dec 16, 2004
#15
  • Dec 16, 2004
  • #15
Gibbo97.......



Is your car currently painted cobalt blue? I cant really tell from the pics. If you have other pics that shows the car in better light then please post them up.



As far as my winter work on the car........... Ohhhhhhhh a little of this and a little of that......... Currently the car has no interior and no front bumper, all will be revealed in the spring
 

nmcgrawj

Advanced Member
Sep 28, 2003
3,651
4
68
41
Indianapolis, IN
Dec 16, 2004
#16
  • Dec 16, 2004
  • #16
pleasehelp said:
Installing the following:
TFS engine kit(TW heads, stage 1 cam, street heat intake, timing chain)
Mac Longtube headers
Mac Prochamber
Kirban fuel pressure regulator
BBK fuel pressure gauge
Deleting smog and egr
Switching to Fox TB setup(75mm accufab TB, egr delete plate, fox tb cable and bracket, CAI)
TKO trans
aluminum driveshaft
driveshaft safety loop
steeda tri ax shifter
new clutch
.........all of I think of for now. Going to feel like a different car from the stock form it is now. Can't wait for next summer!
Click to expand...


Wow me and you are basically doing the same thing:

Im doing the following:
TFS heads with Fox Lake stage 1 port job
Holley Systemax Intake
Jay Allen Custom Cam
BBK Longtube headers
BBK shorty h-pipe
Kirban fuel pressure regulator
fuel pressure gauge
Deleting smog and egr
Switching to Fox TB setup(75mm accufab TB, egr delete plate, fox tb cable and bracket, CAI)
G-Force trans
 

Gibbo97

Founding Member
Apr 20, 2001
92
0
7
55
Macon, GA
Dec 16, 2004
#17
  • Dec 16, 2004
  • #17
The engine bay is the only thing painted atm the color, but the rest of the car is awaiting paint to shoot it. let me see if I can find a pic of the bay

View attachment 519491
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Dec 16, 2004
#18
  • Dec 16, 2004
  • #18
Joes95GT said:
My winter project: Watch Grn92LX make up his mind about what he's going to do to his car. This could last through winter and into the spring time.

Joe
Click to expand...


I sold the blower. I decided I DO want to some some changes, but nothing too wild or super expen$ive. I been talking with Ed and he is giving me some nice numbers with the changes i'm planning After I sell the old parts, its really not too much money out of my pocket. Just too bad I don't have a local track anymore so I could really see the gains Oh and my friend has a nitrous express wet kit he's selling at a nice price When is your car gonna grace the 1/4 mile track? (and actually make it down the whole way )
 
D

Darkhorse845

Banned
Nov 17, 2004
101
0
0
Las Vegas,Nevada
Dec 16, 2004
#19
  • Dec 16, 2004
  • #19
Gibbo97 said:
Hmmmmmmm, let's see....

1) Install new DSS 331 longblock assembly with ALL new parts, right down to the ARP bolts.
View attachment 519487

2) Install Vortech V2-SQ supercharger kit.
View attachment 519489

3) Install Tremec T-56 transmission.



4) redo interior: changing from a stock black/tan interior to all black, new carpet, dying interior pieces, installing a rear seat delete kit, reinstalling corbeau CR-1 seats.
<img src="http://img.photobucket.com/albums/v350/Gibbo97/phonepix2004.jpg" width=960 height=720>

5) complete repaint of exterior - House of Kolor Shimerin Kandy Basecoat Cobalt Blue.


6) Put in new air freshener.
Click to expand...
Thats really awesome!
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
55
Boca Raton, Florida
www.mustangworks.com
Dec 16, 2004
#20
  • Dec 16, 2004
  • #20


Finish filling all the holes in the engine bay.
Paint Engine bay.
Install K member
Install Strange shocks.
Install caster/camber plates.
Install new motor
Install PMS
Lots of other stuff.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

  • Sticky
Free Beta Access: Tool I Built to Hunt Fox Bodies Faster
  • MRaburn
  • Mar 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
554
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 7, 2026
FastDriver
T
Progress Thread 2002 Mustang 3.8L CV
  • TheIncompetentMechanic
  • May 26, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
87
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
TheIncompetentMechanic
T
R
94’ SN95 - Intermittent lope & bogging at moderate rpm
  • Red5.0ho
  • Nov 2, 2025
  • 1994 - 1995 Specific Tech
Replies
5
Views
484
1994 - 1995 Specific Tech Nov 3, 2025
General karthief
T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
668
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
153
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?