whats size t-body?

[5.0fox]

what size throttle body should i get for my setup? and will it require me to port the intake opening?

thx in advance

 

[5spd GT]

what size throttle body should i get for my setup? and will it require me to port the intake opening?

thx in advance

I say go with a 65mm FRPP TB and you will have to port the intake opening to get the most out of it...

 

[thumpin347]

why not wait and buy a 70mm TB with a manifold that has a 70mm opening? just my opinion though...i dont see any use for more air into stock restrictive heads and intake...woops never mind, you have ported heads and lower

 

[stang2841]

save your money for something else, throttlebodys are pretty much useless without a bigger mass air meter and a different intake.

the stock mass air meter will choke it, and when you do buy it the 65mm is fine until you either get a blower or your over like 400rwhp

 

[SlowGT]

save your money for something else, throttlebodys are pretty much useless without a bigger mass air meter and a different intake.

the stock mass air meter will choke it, and when you do buy it the 65mm is fine until you either get a blower or your over like 400rwhp

Yeah, what he said. If it were my choice, I'd go for a 73/76mm C&L before a TB. Then an intake upgrade. JMO

 

[5.0fox]

i just ordered a 73 mm c+l before i posted this topic. i decided to go with the 70mm because i plan on adding a trickflow street heat in a couple months. thx for the advice guys

 

[poonstang90lx]

save your money for something else, throttlebodys are pretty much useless without a bigger mass air meter and a different intake.

the stock mass air meter will choke it, and when you do buy it the 65mm is fine until you either get a blower or your over like 400rwhp

I agree with these guys get the C&L first then tbody

 

[shorty1993]

agreed as well