Wheel bearing help please

I know this sounds dumb, but I have replaced my front wheel bearings twice in the last year because they were making noise, when I would go around a corner. But when I pulled the wheel bearings out, the races and the bearings looked good. So I checked the spindle and the spindles look good. I put on yet another set of bearings and the noise was gone for 10 minutes of driving then came back. I am sure, I have seated the races in the rotor good and I am tighting the spindle nut to spec's does anyone else have any idea's????? by the way it is a 1983 5 liter convertable with 15x8 draglites in front with 255 60 tires and a 1/4aluminum spacer.I am now suspecting the aluminum spacers but the sound it makes sounds exacutully like wheel bearings

It's actually a tick tick tick just like loose wheel bearing's and only around corners.


also I made sue that the tires, when the are on the jack didnt have any wobble

I just figured it out,
I put a little wheel bearing grease in between the spacer and the rim. and the spacer and the hub and wham no noise I suspect that the aluminum spacers were moving just enough, when I as cornering to make noise. :damnit:
but I appreciate everyones help