wheel offset questions with sn95 brakes

I think the +36mm offset is going to be too much. On a 9" rim, that's almost 6.5" of backspacing. I can guarantee that will hit your quad shocks. It will probably hit, or come close to hitting, even if you flip them. Good chance the tires will hit the inside of the wheel wells also.

From what i've read, 6" of backspacing is maximum for the rear of a fox car with stock axles. 6.5" backspacing should fit a fox with an SN95 axle swap (the WHOLE axle) since it's over 1/2" longer per side.

I'm trying to find wheels to fit my '90 fox right now and am going throught he whole offset/backspacing crap just like you. From what i've seen so far on my own car and on other people's cars, i don't think those rears will fit.

I would be less worried about the quads, they are removable. I would worry more about the rim/tire hitting the inner fender well. On my car, Fox lentgh axles, 24mm Cobra R, it is damn close. And I am only running a 245 series tire.

See http://www.svo73mm.cjb.net/ for help.

According to Matt90GT, the SN95 rear axles are 3/4" longer, so a greater offset will be OK.

Are you sure your AFS wheels are 36mm BS? I don't see it on thier website and I didn't know they made them. That wheel was made specifically for sn95 rear brakes on fox bodies to make up for the 3/4 inch difference but far as I know only Ford motorsport made them. If your running drum brakes you would be fine with the 5.95 BS or you can run a 1/2 spacer till you upgrade your brakes.

jrichker said:

See http://www.svo73mm.cjb.net/ for help.

According to Matt90GT, the SN95 rear axles are 3/4" longer, so a greater offset will be OK.

Click to expand...

He specifically said that he will NOT be using the SN95 axles. So, he's using the large offset with the stock length axles.