Wheel studs
- Thread starter SMOKEDYA
- Start date
Juiced87Notch
Member
I'm not posative about the 93's but I could on my 98 so I'd say yes.SMOKEDYA said:Can you get the stock wheel studs out of a 93 and install longer hardened new ones without pulling the axles? peace
john
gospeedgo
Banned
You need to press the studs in, and on car would be a challenge. The axles come out really easily, i wouldnt fight it.
If he says he did it on his car, you should be able to as well. I would still would pull them though!
If he says he did it on his car, you should be able to as well. I would still would pull them though!
K well i know when i broke off 3 of them on the 95 i was able to get them out and in w/o removing the axles. The press in and out is no biggie i was planning to take them to work on wensday to do so if i had to. Thanks jeff. peacegospeedgo said:
john
Juiced87Notch
Member
yea I just used the old spacer/run a nut on with an impact untill it seats meathod... works, but I'm sure it stresses the hell out of the threads, that and it really isnt hard to jack the car up, pull the pumpkin cover, take out 2 c-clips and slide the axles outgospeedgo said:
I was just bein lazy.
gospeedgo
Banned
