• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

When should I replace O2 Sensor?

  • Thread starter Thread starter glowstang93
  • Start date Start date Feb 22, 2007

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Feb 22, 2007
#1
  • Feb 22, 2007
  • #1
This is on a 4 banger, but I wouldn't think it would be too much different. So here is my question I've got 85,000 miles on her and still the original O2 sensor. Don't notice any hesitating, idle sometimes is a litle rough, but not dying. When should you replace the O2 sensor? A certain mileage?

Thanks
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Feb 22, 2007
#2
  • Feb 22, 2007
  • #2
I think the books all recommend 60k miles, but I am sure they can go longer...

The rough idle could be several things.
Do you get any codes?


jason
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Feb 22, 2007
#3
  • Feb 22, 2007
  • #3
No codes, just being proactive and may even help the fuel mileage.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 23, 2007
#4
  • Feb 23, 2007
  • #4
Anthony, I might give the sensor a quick check with your meter. I do this when I'm unsure of how they're doing. I look for it to toggle between 0.05 and 0.95 Volts (or somewhere close to both of those) atleast once a second.

It's pretty apparent when an O2 has taken a dump - the amplitude is gone and the frequency might be pretty slow. Otherwise, you might be able to leave well enough alone.

Good luck bud.
BTW, the car looked good all shined up.
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Feb 23, 2007
#5
  • Feb 23, 2007
  • #5
Thanks JT

Ok, you knew this question was coming next. To hook up a meter to it, do you unplug the sensor plug , put the meter negative on ground and the positive on the sensor wire that is not a dark color (ground)?

It doesn't look too hard to replace. I was thinking it was on the topside of the manifold, but its actually pointing toward the ground. So she will have to be jacked up to get to it easily.

Man, a lift would be nice right now. I could change the oil, o2 sensor, transmission filter/fluid, fuel filter and differential fluid all in one lift

So when the O2 goes out does go out, does the engine keep running, but just poorly?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 23, 2007
#6
  • Feb 23, 2007
  • #6
When I check the O2 voltages in real time (car running), I simply gain access to the O2 signal wire (I'm unsure of what color or pin it is on a 4 banger). This can be done in the kick panel where the EEC harness connects to the computer or at the O2's connector. If doing the latter, I'd recommend a jumper harness so you are not lying underneath an idling car. The kick panel might be the easiest.

Anyhow, you leave all harnesses connected and see how the O2 does in it's normal dynamic. No need to unplug anything.

Good luck bud.
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Feb 23, 2007
#7
  • Feb 23, 2007
  • #7
Thanks JT.

I talked to my friend/mechanic. He basically said what you had said. If it ain't broke, don't fix it. He said the the CEL will come on if it is not working correctly. So , I'm going to leave well enough alone for now. My luck, I would take it out and the threads would be rusted or stripped and I would have to buy a new manifold
 

stang&2Birds

Founding Member
May 4, 2000
2,091
5
58
New England. :-) CT/MA
Feb 23, 2007
#8
  • Feb 23, 2007
  • #8
30K! After ~30K, they slow down and become less accurate.
 
You must log in or register to reply here.

Similar threads

Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
631
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
625
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
G
2006 Mustang GT o2 Sensor Wiring Issue Car Bogging/Choking
  • GCantero93
  • Sep 5, 2025
  • 2005 - 2009 Specific Tech
Replies
4
Views
1K
2005 - 2009 Specific Tech Sep 6, 2025
Noobz347
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
702
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?