• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Where can I find MACH1/BULLITT gauges?

  • Thread starter Thread starter Cobra Jay
  • Start date Start date Aug 30, 2004

Cobra Jay

Member
Apr 7, 2004
889
0
16
Motor City
Aug 30, 2004
#1
  • Aug 30, 2004
  • #1
Anyone know where I can get MACH1/BULLITT gauges? I'd also like to get the silver piece that surrounds them.

Right now I've got Reverse EL-glo white face gauges that I bought from PartShopper. I like them, but I'm sick of tearing my dash apart trying to line them up so the needles don't stick on the holes cut in them. I swear I've had it apart atleast 5 times because the needles keep getting stuck. Their the kind that you don't have to remove the needles to install them, but the way the holes are cut, they are to big and the speedo and tach needle is constantly getting stuck. When the car sits out in the sun it doesn't happen as much, but it sucks when you're driving along and they get stuck and you don't know how fast you're really going. I'm going to get rid of them once and for all, and I've decided that I'd like to get some like the one's used on the MACH1's/BULLITT's. I think I like the looks of them better than the white face gauges. Any help would be greatly appreciated. Thanks GT JAY
 
J

jbrown

New Member
Aug 5, 2003
393
0
0
Tallahassee, FL
Aug 31, 2004
#2
  • Aug 31, 2004
  • #2
junkyard? I havent seen them for sale elsewhere, I thought I heard something about the mach gauges not being a direct swap(maybe wiring harness is differant?)
 
P

Pitch Black

New Member
Jul 17, 2004
369
0
0
TX
Aug 31, 2004
#3
  • Aug 31, 2004
  • #3
junkyard or straight from Ford
 

mcmmotorsports

Member
Apr 12, 2004
689
0
17
Danbury, CT
Aug 31, 2004
#4
  • Aug 31, 2004
  • #4
From ford they are about $285.
Just make sure you get the gauges for the Bullitt and not the Mach since your redline would be off with the latter.
 

krly79

Member
May 6, 2003
464
0
16
VA Beach & So Illinois
Aug 31, 2004
#5
  • Aug 31, 2004
  • #5
mcmmotorsports said:
From ford they are about $285.
Just make sure you get the gauges for the Bullitt and not the Mach since your redline would be off with the latter.
Click to expand...

Uless you got gauges for an auto Mach 1. They redline at the same rpm as the GT's.
 

02camarokiller

New Member
Jul 28, 2004
91
0
0
Enid, Oklahoma
Aug 31, 2004
#6
  • Aug 31, 2004
  • #6
mcmmotorsports said:
From ford they are about $285.
Just make sure you get the gauges for the Bullitt and not the Mach since your redline would be off with the latter.
Click to expand...

If you get the bullitt gauges, I don't think it will have the silver backing. I think that's only on the mach 1. I have them installed and the red line is off...just don't go over 6K and you're cool. I got mine from Kansas City Mustang for 200.00.
 

Cobra Jay

Member
Apr 7, 2004
889
0
16
Motor City
Aug 31, 2004
#7
  • Aug 31, 2004
  • #7
Thanks guys. I'll try my Ford dealer tomorrow and see what they want for them. I get an employee discount on parts so it might help a little. I think it's like a 10% discount . Every little bit helps, especially if their $200+. I'll also try a friend of a friend who use to work at Dearborn assembly. He might know if there are any leftover parts laying around anywhere. Thanks again
 
You must log in or register to reply here.

Similar threads

J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
371
SVT Tech Forum Nov 20, 2025
nickyb
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
31
Views
874
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 11, 2026
2000xp8
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
17
Views
767
SN95 V6 Mustang Tech Aug 29, 2026
joeybuddy96
J
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
302
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?