Where to buy "Cam bolts/eccentric"

[DTNODYA]

Does anyone know where to buy cam bolts (camber) for our cars? I can find them for every rice cake out there but none for Mustangs. Thx peepz.

I found a thread saying Napa, H&R, Eibach sells them ... I just can't find em'. What size do I need? Etc...

 

[bdcardinal]

call up your local napa and ask for them. if you have one in your area, Fast Undercar is good to have them.

fast undercar mostly supplies actual shops. thats where they get a lot of their suspension parts from. they will sell to individuals though.

 

[DTNODYA]

call up your local napa and ask for them. if you have one in your area, Fast Undercar is good to have them.

fast undercar mostly supplies actual shops. thats where they get a lot of their suspension parts from. they will sell to individuals though.

I called napa and they were like "I've never heard of such a thing" ... Is there a technical term for them?

 

[SaleenGT2001]

you need an 18mm camber bolt. tell them to cross referance part # 81280.

 

[SaleenGT2001]

just call this number and tell them you need part #81280

SPC
Please contact us directly at 1-800-525-6505 for further assistance.

 

[DTNODYA]

just call this number and tell them you need part #81280

SPC
Please contact us directly at 1-800-525-6505 for further assistance.

Are you talking about NAPA? I called them and gave them that number ... they said "nothing shows up" .. What is 1-800-525-6505 for? My cell phone just took a dive with me into my Dad's pool ... it's drying out.

 

[SaleenGT2001]

the 188 # is for SPC. they carry what you need.

 

[JayC]

I got some from NAPA..... part #'s for the bolts I got are 264-3638, you'll need two

Jay

 

[DTNODYA]

I got some from NAPA..... part #'s for the bolts I got are 264-3638, you'll need two

Jay

I just got back from NAPA (one with warehouse) and they had em'. Thanks for the part number. Is there any certain way that they are supposed to be installed? Meaning, do you just put them in the same direction as the 'old' bolt? Some I've read about (for other cars not Mustangs) say to put the bolt in the opposite way of the other one.

the 188 # is for SPC. they carry what you need.

Thanks for the number, I would have called it if the warehouse NAPA didn't have them. They did, but thanks for the number either way.

 

[JayC]

I just got back from NAPA (one with warehouse) and they had em'. Thanks for the part number. Is there any certain way that they are supposed to be installed? Meaning, do you just put them in the same direction as the 'old' bolt? Some I've read about (for other cars not Mustangs) say to put the bolt in the opposite way of the other one.

I had my alignment guy install mine


Jay

 

[DTNODYA]

I put them in just to play around and see if I could get the front close and I did. I don't have any way of measuring but I now can have positive camber without adjusting from the top (lowered 1 1/2 in front and back), which is good because I am sure it can be alligned. I'm going to let the alignment people mess with specifics ... just wanted to see if they made a difference .. and they did!