Where to get Edelbrock Gasket's?

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

Oct 21, 2004

#1

• Oct 21, 2004

• #1

i just got my edelbrock performer rpm intake and heads. im looking for everything ill be needing when i build my engine, i cant find the gaskets needed.

i need the head gaskets, intake gaskets, upper to lower intake, exhaust gaskets, ect. can anyone link me to where they are sold?

thanks

 

G

gt90stang

New Member

Dec 7, 2002

568

0

0

Oct 21, 2004

#2

• Oct 21, 2004

• #2

I special ordered them from Kragen Auto, you can probably order them over the web. Also Summit Racing could get them to you. If it is a new intake it will have all gaskets except for the intake manifold gasket to the heads and block.

Good Luck, Don

 

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

Oct 21, 2004

#3

• Oct 21, 2004

• #3

i looked up all the part numbers and searched on summit last night.

they have like 2 of the 4 i need and nothing listed for the others. should i just call them over the phone and see what i can get?

 

G

gt90stang

New Member

Dec 7, 2002

568

0

0

Oct 21, 2004

#4

• Oct 21, 2004

• #4

88SC_GT said:

i looked up all the part numbers and searched on summit last night.

they have like 2 of the 4 i need and nothing listed for the others. should i just call them over the phone and see what i can get?

Click to expand...

Yeah, call them they have great tech support from my experience.

Don

 

S

SlowGT

Founding Member

Jun 17, 1999

826

0

0

Columbia Co, PA

Oct 22, 2004

#5

• Oct 22, 2004

• #5

I don't know what the dimensions are on the Edelbrock gaskets, but here's some Fel-Pro numbers that may work:


I know these head gaskets will work: FPP-10112

Lower intake: The RPM ports are 1.05" x 1.88". The FelPro (FPP-1250) ports are 1.2" x 2.0").

Exhaust: FPP-1415 ports are 1.25" x 1.48"

If you give me the port dimensions from the heads, I can look through the Fel-Pro catalog and try to match some part numbers for you.

 

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

Oct 22, 2004

#6

• Oct 22, 2004

• #6

thanks for the information.

im going to call summit tomorrow and see if they can get me the edelbrock gaskets. if not ill take the measurements off the heads.