• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Which block?

  • Thread starter Thread starter ms93gt
  • Start date Start date Aug 31, 2005
M

ms93gt

New Member
Oct 15, 2004
239
0
0
Bayville, NJ
Aug 31, 2005
#1
  • Aug 31, 2005
  • #1
My goals are to run low 10's with around 600rwhp. I know an r block will do it but its just to expensive for me. So my question is what block will put me there, roller block to be exact?
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 31, 2005
#2
  • Aug 31, 2005
  • #2
Dart Sportsman. $1900 and costs considerably less to get all the machine work done.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Aug 31, 2005
#3
  • Aug 31, 2005
  • #3
Shouldn't take 600hp to run low 10's if you're hooking. dart block is the way to go if you have the cash and wanna do it the right way.
 
M

ms93gt

New Member
Oct 15, 2004
239
0
0
Bayville, NJ
Aug 31, 2005
#4
  • Aug 31, 2005
  • #4
Would the stock block be able to run low 10's? What about a ford sportsman?
 
N

NUTCASE

New Member
Mar 31, 2005
187
0
0
Aug 31, 2005
#5
  • Aug 31, 2005
  • #5
Grn92LX said:
Shouldn't take 600hp to run low 10's if you're hooking. dart block is the way to go if you have the cash and wanna do it the right way.
Click to expand...

and if you have a decently flat torq curve. alot of these imports and such need like 800hp to run 11's becouse they only have like 1500rpm of usable power

well, anyways, if times and cheap are your goal I would go with a newer 351 block out of like an econoline van or something. biuld that bitch and spray it
 
N

NUTCASE

New Member
Mar 31, 2005
187
0
0
Aug 31, 2005
#6
  • Aug 31, 2005
  • #6
ms93gt said:
Would the stock block be able to run low 10's? What about a ford sportsman?
Click to expand...


people have gone 9's on the stock shortblock. but the car is pretty much a coffie can on wheeles.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Aug 31, 2005
#7
  • Aug 31, 2005
  • #7
ms93gt said:
Would the stock block be able to run low 10's? What about a ford sportsman?
Click to expand...

Ford Sportsman is a joke. It's a really expensive stock block in terms of HP capability.
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 31, 2005
#8
  • Aug 31, 2005
  • #8
Daggar said:
Ford Sportsman is a joke. It's a really expensive stock block in terms of HP capability.
Click to expand...

I can't believe they wanna charge $900 for a basically stock block...strengthened main caps and and main webbing my a$$

wanna make a $900 (or $1200 for that matter) aftermarket block that sells? nodular four bolt mains on 2,3,and 4, main webbing that doesn't taper off to 0.100", and walls thick enough to bore out at least 0.060" without worrying about core shift-oh! and no need for finish honing of the lifter bores, or main bores.

basically a Boss block with thicker cylinder walls, and main webbing...

edit: I know, I know, the Dart is only $1800 from some places, but then you still have to have the lifter bores finished, and honestly some people are only looking for an interim block, one that won't split @ 450hp...I don't need a block that can support 1200+hp...650 would be right up my alley though
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 31, 2005
#9
  • Aug 31, 2005
  • #9
sorry guys that was totally :OT:
 

Blk91stang

Member
Jan 3, 2003
607
0
16
North Brunswick, NJ
Aug 31, 2005
#10
  • Aug 31, 2005
  • #10
txstang84 said:
I don't need a block that can support 1200+hp...650 would be right up my alley though
Click to expand...

Don't we all... There's really no in between. It's either a stocker or a Dart.

If you want 600rwhp and 10's from a 302 based block, I surely hope $1,800 for a good block should not be a problem. You'll see what I'm talking about when you start breaking major components.
 
S

strokedandblown

Banned
May 3, 2005
555
0
0
USA
Aug 31, 2005
#11
  • Aug 31, 2005
  • #11
Blk91stang said:
Don't we all... There's really no in between. It's either a stocker or a Dart.

If you want 600rwhp and 10's from a 302 based block, I surely hope $1,800 for a good block should not be a problem. You'll see what I'm talking about when you start breaking major components.
Click to expand...

Pay = PLay exeptions


if i have to ill break the pic out..
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 31, 2005
#12
  • Aug 31, 2005
  • #12
strokedandblown said:
Pay = PLay exeptions


if i have to ill break the pic out..
Click to expand...

trust me, i'm very aware of the consequences of putting a stock block through the rigors of high hp...i don't need to see any pix to reitterrate that truth. just kinda irritating that Ford never saw fit to produce a more rigid four bolt block in higher numbers than were available...

i know that if i want stratospheric hp numbers, I will be req'd to save up the green to purchase a Dart or WP block...such is life
 
M

ms93gt

New Member
Oct 15, 2004
239
0
0
Bayville, NJ
Aug 31, 2005
#13
  • Aug 31, 2005
  • #13
What about a mexican block? Enough for 600rwhp?
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 31, 2005
#14
  • Aug 31, 2005
  • #14
...honestly, you're still pushing it, the Mexican block is usually better than a roller block, but it's still a 2 bolt, and it's still got fairly thin webbing...it's (supposedly) cast from a higher nickle content alloy, but you'll still be limited...

and if you were to run a Mexican block, you'd either have to run a flat tappet cam, or to use a roller, you'd have to run a small base cirlce cam with stock lifters, or get the expensive locking bar lifters with a stock style roller cam
 
You must log in or register to reply here.

Similar threads

Engine Code 41 again
  • Creomod
  • Jul 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
827
Fox 5.0 Mustang Tech Jul 11, 2026
Mcmahst
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
516
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
Fox Block Decode
  • PonyGTrider
  • Jun 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
164
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
PonyGTrider
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
473
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Block draining
  • JD1964
  • Mar 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
170
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 27, 2026
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?