Which clutch?

[mity2]

i need to order clutch. I think i'm going with SPEC. Now, it tells me that i need to know which clutch i need. My valve cover bolts are 12. So which one i need???

 

[snGTstang]

dont know, but i need a new clutch too and have no idea which one to get. i want one a little bit upgraded from stock. (2003 mach 1)

 

[bdcardinal]

i need to order clutch. I think i'm going with SPEC. Now, it tells me that i need to know which clutch i need. My valve cover bolts are 12. So which one i need???

they probably want to know if you have a t45 or a T3650.

 

[mity2]

well, i think i need to know how many bolts on pass. valve cover. its either 14 valvecover bolts on assenger side or 12 bolts perside right?

 

[blackink00]

why the hell do they need to know that. it should be a 10.5in clutch with i think six bolt holes. and its a 10 spline in. im still rooting for a mcleod

 

[mity2]

why the hell do they need to know that. it should be a 10.5in clutch with i think six bolt holes. and its a 10 spline in. im still rooting for a mcleod

because thats what partshoper is asking me. And according to summit, there are 10.5" AND 11" clutches available for 2001, depending on above noted valve cover bolts. and its 26spline shaft. not 10... And ya i like to get Mcleod twinclutch kits, but they are $1028.39!!!

dont know, but i need a new clutch too and have no idea which one to get. i want one a little bit upgraded from stock. (2003 mach 1)

i think this confusion of 10.5" or 11" thing is only because sometime in model year 2001, Ford changed stuff around. you being 2003, i don't think it matters.
Just get SPEC stage 2. entire kit for around $300. But if ur mach 1, do they go by GT clutch or cobra clutch???

 

[urban96]

why not measure your busted up clutch

 

[mity2]

why not measure your busted up clutch

busted up clutch... thats sound sooo funny somehow

 

[twogts4us]

Check the VCL sticker on the driver's door post. Under "TR" you'll see a "K" for the TR-3650 (which uses an 11" clutch) or a "6", indicating you've got the T-45, and a 10.5" clutch.

 

[blackink00]

if its a t-45 its a 10.5in. and im supriesed its a 26 spline because ive never seen that out of a t-45.

 

[mity2]

if its a t-45 its a 10.5in. and im supriesed its a 26 spline because ive never seen that out of a t-45.

thats what it says in Summit racing

 

[blackink00]

just look at your old one and count how many teeth are there in the middle