I have a 69 fatsback which now has a mid 80's 351, the flexplate it came with was too large in diameter to fit in my C4's behousing, so I use a 81 and up 302 flexplate and almost everything bolted up correctly. one problem, the TC studs are sticking too far past the flexplate creating a clearance problem.
The weights are different, but I can alwasy get it rebalanced but the offset on the flwheel is not he same causing the clerance problem, if I go to my local parts store what year and car should I specify in order to get the right flexplate for my setup?
The weights are different, but I can alwasy get it rebalanced but the offset on the flwheel is not he same causing the clerance problem, if I go to my local parts store what year and car should I specify in order to get the right flexplate for my setup?