Which intake gasket FEL 1262 or 1250 (ported E7's, ported cobra)?

[Ishman 306]

Which gasket would be better for mildy ported stock E7's and mildly ported cobra intake? 1250 or 1262?

Which one comes in the general lower intake kit you get from advance auto parts or autozone?

 

[89lxcoupe]

well for the money the felpro 1250's are junk don't know if the 1262's are the same but the paper gasket doesn't seal well mine were sucking oil from the lifter valley and that was on 2 different stangs i've owned. i like the felpro rubber coated looking ones, if your mildly porting then the stock gasket should work fine just port match to the gasket !

 

[Marlboro_Man]

well for the money the felpro 1250's are junk don't know if the 1262's are the same but the paper gasket doesn't seal well mine were sucking oil from the lifter valley and that was on 2 different stangs i've owned. i like the felpro rubber coated looking ones, if your mildly porting then the stock gasket should work fine just port match to the gasket !

Got a part number for those?

 

[tmoss]

MS93334 - you know the rest of the answer........