Which M/C to use with Granada Conversion on my 70?

[palerider94]

I've got all the parts I need fro a Granda disk conversion except for the M/C. I have a 1970 PB drum setup. Will want to continue running power brakes. From what I understand I need to change the M/C but not compleely sure what M/C I need and if current pushrod will work. Any insights will be greatly appreciated. Getting ready to tackle this in the next couple of weeks. thanks

 

[chockostang]

No worry about the push rod at all.

You simply need to remove the Drum Master from your booster, install a 70 Mustang Disc brake front/Drum rear master (Raybestos number MC36251), Cruise.

All will fit function fine.

Hope this helps

Dan @

ChockoStang

 

[palerider94]

One other question., The spacer that fits between master cylinder and power booster had cracked - does that come with M/C or is that a seperate purchase and do you know where you can get them? Thanks for the help.

 

[chockostang]

Well we hit a snag here.

There is no Spacer between the Master, and Booster on the 70 Mustang??, or the 69 ( Of course 69 vs 70 are different, but still Bendix).

If you have a "Spacer" any thing between the master, and booster, then it is a non stock item for 70/.

The 67 68 Mustangs used a Midland Booster, it had a Aluminum Spacer with a Plastic insert, Could someone have installed a 67 68 Midland??

If so, did they change the Pedal, 69- 70 Power Disc Pedals are Different animals, A LOT of Food for thought here.

All has to be correct to work properly. Mixing non stock, "Will Work, "Like Original" "They look similar" Parts are different, won't work.

Dan @

Chockostang

 

[palerider94]

I believe you're on to something with 67/68 midland. Attached are some pics of booster and M/C. Any insights - appreciate all your help!!