Which parts needed to switch to V8 brakes?

markwsoil · Mar 11, 2006

I have a '91 LX that needs front rotors. I also have the spindles for a 5.0. I'm thinking of putting on those spindles so I can upgrade to V8 brakes. My mechanic tells me that the struts won't fit.

Anybody done this? Can you tell me if that's true, or what parts would I need? I know I need the V8 rotors, calipers / pads, and bearings. What else do I have to do (I know it will need an alignment if I put on new spindles)?

Need to know pretty quick, as the rotors are so warped that her feet get a good paddling every time she puts on the brakes.

Thanks

Shawneebear93 · Mar 11, 2006

This should help.
http://www.stinger-performance.com/discbrakeupgrade.html

AmusedToDeath · Mar 12, 2006

I had my 93 taken in to have the front brakes swapped over to the V8 brakes, the only complication was that the mechanic had to use a bunch of washers to fill in the space on the struts (I think it was the struts, it was awhile ago).

Other than that, it went along fine. I had the whole complete brake setup (rotors, pads, spindles, etc), however. As far parts, you should be good with what you mentioned. Just beware, the brakes may feel squishy and unresponsive at first, but should get better after awhile. May even need an alignment, but it depends. Good luck.

ratrapp2 · Mar 13, 2006

yes,it'll definitly need an alignment.you'll also need new brake hose's and banjo bolts and caliper bolts.changed my 88 over to v8 brakes a few years ago and you do need to change the struts also.

Which parts needed to switch to V8 brakes?

markwsoil

New Member

Shawneebear93

AmusedToDeath

New Member

ratrapp2

New Member

Similar threads

Which parts needed to switch to V8 brakes?

markwsoil

New Member

Shawneebear93

AmusedToDeath

New Member

ratrapp2

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency