• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Which plugs?

  • Thread starter Thread starter nick_94cobra
  • Start date Start date Aug 11, 2007
N

nick_94cobra

New Member
Dec 20, 2006
25
0
0
Aug 11, 2007
#1
  • Aug 11, 2007
  • #1
hey everyone

I've got a 94 gt, 332 stroker, edelbrock peformer rpm heads, and i'm having a problem with spark knock on hard accel around 4-5k rpm. i've backed the timing back to 10* and i always run 93 octane. i am running stock motorcraft plugs. Any ideas on how to correct this problem? I've also cleaned the maf and installed new plug wires. the new wires are MSD 9mm.

Thanks for the help in advance
Thanks for the help in advance
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Aug 11, 2007
#2
  • Aug 11, 2007
  • #2
Those heads require Autolite 3924's...

What is your estimated static compression?

The compression will determine what gap you typically can run...

The 3924's can work in a pretty wide range of compression as well...
 
N

nick_94cobra

New Member
Dec 20, 2006
25
0
0
Aug 11, 2007
#3
  • Aug 11, 2007
  • #3
When i bought the stroker kit, with the 58cc heads, the compression was supposed to be 9.5:1. However, the pistons had .040" taken off them, so i'm figuring the compression to be around 10.3:1 or so
 

juiced_94gt

Active Member
Mar 30, 2005
1,143
0
36
Southern California
Aug 11, 2007
#4
  • Aug 11, 2007
  • #4
sorry to hijack but what gap should i use for a 10.2:1 compression?? i gapped mine at .54 for my 331
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Aug 11, 2007
#5
  • Aug 11, 2007
  • #5
Either of those compressions are fine...many put it around .045-.050"...

But juiced, if you aren't having any spark blow-out (missing), .054" is fine...

I know many put it around .045-.050"...

Run as much gap as you can without it missing...
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
402
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
405
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
I
98 Mustang GT dying
  • ItsMason
  • May 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
246
1996 - 2004 SN95 Mustang -General/Talk- Jun 25, 2026
lenzgt
L
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
527
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?