Which Portland Alignment Shop?

Kerpal · Jan 27, 2006

I need to get my car aligned soon since it's pretty far off right now. It does have a bumpsteer kit on it as well so I'm kind of wary of just going to les schwab or the like...

What's a good shop in the Portland area that is familiar with mustangs and will be able to do a "performance" alignment? I've heard that the stock settings are not really optimal and that a good shop should know how to set it for improved handling.

Juiced87Notch · Jan 27, 2006

Kerpal said:
I need to get my car aligned soon since it's pretty far off right now. It does have a bumpsteer kit on it as well so I'm kind of wary of just going to les schwab or the like...

What's a good shop in the Portland area that is familiar with mustangs and will be able to do a "performance" alignment? I've heard that the stock settings are not really optimal and that a good shop should know how to set it for improved handling.

I work at the les schwab on 122nd and division. I know my way around stangs and so does our main alingment guy brad smith, if I'm not there brad will be, just tell him what you want your car aligned for, tire wear or performance. if your still wary about les schwab, johns frame shop by krazy koncepts does good work as well

Kerpal · Jan 28, 2006

cool... if you guys know stangs then that's a different story.

Juiced87Notch · Jan 29, 2006

Kerpal said:
cool... if you guys know stangs then that's a different story.

oh yea hehe I've had everything but the k member out from under my 98 about 5 times now... adding stuff or changing to different parts.. I'll be doing it again here as soon as my k member and controll arms show up hehe.

duner · Jan 29, 2006

I've used the Les Schwab on Imbrie Drive in Hillsboro with good results. I watched them and the tech was very anal.

BayBoss · Jan 31, 2006

i have herd good things from the 122nd store but for the most part i have had a terrible experience with them in the past and i have used johns for my last three times and they do a great job except when they burnt a hole in my seat but they fixed it. I strongly recomend johns for any kind of frame work.

Juiced87Notch · Feb 1, 2006

BayBoss said:
i have herd good things from the 122nd store but for the most part i have had a terrible experience with them in the past and i have used johns for my last three times and they do a great job except when they burnt a hole in my seat but they fixed it. I strongly recomend johns for any kind of frame work.

yea I hate to talk bad about the company I work for, but some of the stores are really hit and miss, I got lucky that I got hired where I did and not a different store.

74courier · Feb 1, 2006

ive had a few bad experinces with les schawb like the time they only hand tightend the lug nuts on my car and let me drive off the lot without telling me they snapped off a wheel stud i got on the freeway drove to tigard and when i went to get back in my car i was backing out from where i parked and the damn wheel fell off and casued some damage to my fender. they wouldnt take any blame for it so we had to take them to court over it.

Juiced87Notch · Feb 1, 2006

74courier said:
ive had a few bad experinces with les schawb like the time they only hand tightend the lug nuts on my car and let me drive off the lot without telling me they snapped off a wheel stud i got on the freeway drove to tigard and when i went to get back in my car i was backing out from where i parked and the damn wheel fell off and casued some damage to my fender. they wouldnt take any blame for it so we had to take them to court over it.

yea... that'd ruin it for me to... I'm glad I work with the manager that I have because he absolutely will not settle for **** like that happening, I mean sure ppl screw up and make mistakes, but this is a car, what we do can endanger the owner of the car, anyone else in the car as well as anyone else on the road near that car, I thought some of the training he put us through was harsh and repetative but I realize it aint. sorry you had that happen man.

Repostyle · Feb 1, 2006

I won't go to anyone but these guys:

The Line-UP Shop
610 NE 102nd
Portland, OR 97220
503) 252-3407
m-f 7:30-5:00 pm

Cheap, fast, and quality. I always get a second look after I go to a shop I've never been before. I went to The Line-Up Shop and got my lifted Explorer aligned, then 2 days later went to Les Schwab on 21st and columbia. I told L.S. that it was pulling to one side. They told me they couldn't find anything wrong. That was exactly what I wanted to hear. They even asked me if I was sure it was pulling. Their answer to it pulling was that I must need new tires even though they couldn't explain why.

I'm not saying anything bad about Les Schwab, it very well could have been the same story the other way around. But The Line-up Shop knows what they are doing.

Juiced87Notch · Feb 2, 2006

Repostyle said:
I won't go to anyone but these guys:

The Line-UP Shop
610 NE 102nd
Portland, OR 97220
503) 252-3407
m-f 7:30-5:00 pm

Cheap, fast, and quality. I always get a second look after I go to a shop I've never been before. I went to The Line-Up Shop and got my lifted Explorer aligned, then 2 days later went to Les Schwab on 21st and columbia. I told L.S. that it was pulling to one side. They told me they couldn't find anything wrong. That was exactly what I wanted to hear. They even asked me if I was sure it was pulling. Their answer to it pulling was that I must need new tires even though they couldn't explain why.

I'm not saying anything bad about Les Schwab, it very well could have been the same story the other way around. But The Line-up Shop knows what they are doing.

they were probly thinking it was a radial pull, it has to do with the construction of the tire... every once in awhile you'll find one thats defective and it'll cause it to pull, easy way to tell is cross switch the 2 front tires. but thats probly why they said that

Kerpal · Feb 17, 2006

thanks for the advice, I'll have to call around early next week and see who can get it in... other people have told me good things about those 3 shops so I'm sure any of them will be fine...

now if I can just get these damn rebuilt control arms back in the car... I knew keeping the stock springs would make this a fun job... not.

Which Portland Alignment Shop?

Kerpal

New Member

Juiced87Notch

Member

Kerpal

New Member

Juiced87Notch

Member

duner

Mr. Warmth

BayBoss

Member

Juiced87Notch

Member

74courier

New Member

Juiced87Notch

Member

Repostyle

Member

Juiced87Notch

Member

Kerpal

New Member

Similar threads

Which Portland Alignment Shop?

New Member

Member

New Member

Member

Mr. Warmth

Member

Member

New Member

Member

Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency