Which powerpipe for 75mm fox style t body

a_k

New Member

Nov 12, 2004

170

0

0

Saratoga NY

May 6, 2007

#1

• May 6, 2007

• #1

I'm picking my engine up tomorrow morning , and need to do something about my intake. It's a 95 with a 75mm fox style accufab and an 80mm Pro-M. I was looking to get the UPR pipe since they are so much cheaper and do the same thing. I just need some help, I want to make sure the ends of the pipe is big enough to fit over the 75mm t-body and that the 93 style will work on the 95.
Thanks

Adam

 

95strokerPSU

Member

Jul 29, 2004

986

1

19

Sacramento from Philly

May 7, 2007

#2

• May 7, 2007

• #2

I bought 3" aluminum tubing and cut it down to size and connected it with silicone couplers and t-bolt clamps. It's since been chromed and looks amazing. I'll take some pics this weekend when I'm at my first show of the season...

 

a_k

New Member

Nov 12, 2004

170

0

0

Saratoga NY

May 9, 2007

#3

• May 9, 2007

• #3

looks awesome I'll have to call around and see if I can find some of those parts...

 

a_k

New Member

Nov 12, 2004

170

0

0

Saratoga NY

May 15, 2007

#4

• May 15, 2007

• #4

I can't seem to find couplers like you have. Where did you get those? Also anyone else with a similar setup? I am hoping to just order an intake that will work so I don't have to worry about it... looks awesome though

 

95strokerPSU

Member

Jul 29, 2004

986

1

19

Sacramento from Philly

May 16, 2007

#5

• May 16, 2007

• #5

I got most of the couplers from racepartsolutions.com except for the one connecting the TB to the first pipe. I got that off of eBay. It was a 90* coupler that I cut to the right angle. Here's what it looks like chromed....

Good Luck