What rivet do I use for the door lock actuator? I have a couple of the rivets that you use for the doors. I was going to use one of them but they look like they are too long. When I test fit it, it looked like it was coming close to the actuator.
just get a bolt small enough to fit through the hole where the rivet used to be and surper a glue a matching nut to the acuator bracket,then place the acuator back on the bracket,and itz easy from there..Doing this is easier than the rivets because u would have to keep drilling them out, instead of just loosening the bolt
Stuck with door lock actuators that don't work and don't want to pay the $50+ for a new one? Tried the junkyard ones and found that they last six months and freeze up?
A new actuator for less than $4. Fix one side for $17, do both sides for only $23. I don't sell parts, I don’t make any money off of the upgrade, I just tell you how to do it cheaply and easily.
also, though it does not matter now, but the bracket can be removed from the rivet by pulling the C clip on the inside of the bracket (info for future searchers).