Which springs for X-Cam ???

89stang10sec

New Member

Jun 30, 2003

91

0

0

Jan 25, 2004

#1

• Jan 25, 2004

• #1

I need to buy springs for my E7 castings (max ported) that will handle an X-Cam, .544 lift, 6500rpm max. Which springs should I buy?

 

M

mustangrfast88

Founding Member

Sep 22, 2002

330

0

0

middletown ohio

Jan 25, 2004

#2

• Jan 25, 2004

• #2

i would buy some .600 lift springs if it was my engine since the x cam is a .542 lift and with 1.7 roller rocks it would be more then a .550 lift so it would put .550 springs in a bind so i would buy .600 lift springs

 

89stang10sec

New Member

Jun 30, 2003

91

0

0

Jan 26, 2004

#3

• Jan 26, 2004

• #3

Anybody partial to a certain brand? Where is good place to get a set?

 

89stang10sec

New Member

Jun 30, 2003

91

0

0

Jan 27, 2004

#4

• Jan 27, 2004

• #4

One more question. What outside diameter on the springs do I need to get to fit the stock heads?

 

R

redterror302

Founding Member

Jun 29, 2002

895

0

0

Mertztown, PA or State College, PA

Jan 27, 2004

#5

• Jan 27, 2004

• #5

Contact Thumper460. He sells double valve springs for stock heads that are good for .590" lift. That is what I am getting for my heads as well. I think he said something like $130 shipped. Don't quote me on that though.

Chris

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

ROLLING A JOINT

Jan 27, 2004

#6

• Jan 27, 2004

• #6

Yes contact THUMPER.

thumper460@hotmail.com

 

mike keirstead

New Member

Aug 6, 2003

1,121

0

0

ROLLING A JOINT

Jan 27, 2004

#7

• Jan 27, 2004

• #7

89stang10sec said:

One more question. What outside diameter on the springs do I need to get to fit the stock heads?

Click to expand...

1.45

This kit will work also. Summit and Jegs has it.

part # crn-44308-1

Its a crane kit.

 

89stang10sec

New Member

Jun 30, 2003

91

0

0

Jan 28, 2004

#8

• Jan 28, 2004

• #8

Thanks a bunch guys. I'll check out that crane kit and give thumper a call.