Who has SN95 spindles on there FOX?

G

Gearjamer

Founding Member

Mar 13, 2002

104

0

0

Hillsboro, Or

Sep 15, 2005

#1

• Sep 15, 2005

• #1

I've got a question for those of you who have done this convertion. I Just put a set of 95 spindles on my 85 GT. I have the stock control arms ,K-member, MM caster camber plates, and Cobra brakes. Now I can't get negative camber in my alignment. Anyone else have this issue? The alingment shop said my chassis is tweaked which is possible. The car had been in an accident before I got it.

Thanks,
Bill

 

281pony

Active Member

Aug 31, 2003

2,681

2

46

Oly, WA

Sep 15, 2005

#2

• Sep 15, 2005

• #2

no problems with mine.

 

S

stangman393

New Member

Jan 1, 2003

220

0

0

Aloha, OR

Sep 15, 2005

#3

• Sep 15, 2005

• #3

No problems here either but to correct it you can elongate the strut mounting holes to the spindles. Take the 2 upper holes and elongate them inboard. When you go to tighten them back up make sure you are holding the spindle in the negative most position.

 

ddonaca351

Active Member

Dec 1, 2002

2,055

1

48

Camas Washington

Sep 15, 2005

#4

• Sep 15, 2005

• #4

Mine was ok too... might be worth a couple hun to have a frame shop pull it out square.

DD

 

S

stangman393

New Member

Jan 1, 2003

220

0

0

Aloha, OR

Sep 15, 2005

#5

• Sep 15, 2005

• #5

Possibly just get a new k member might fix the problem.

 

G

Gearjamer

Founding Member

Mar 13, 2002

104

0

0

Hillsboro, Or

Sep 16, 2005

#6

• Sep 16, 2005

• #6

I'm going to be looking into having the frame checked and fixed if nessassary. My final plan is to install a MM k-member and Evolution Motorsports Tri-link with watts link out back. I'll have some extra parts left over if anybody is interested.
Global West track link, caster camber plates, front control arms with Del-a-lum bushings, and springs.

-Bill

 

charged9250

Founding Member

Feb 27, 2002

633

0

0

503/808

Sep 16, 2005

#7

• Sep 16, 2005

• #7

No problems with mine.

 

ddonaca351

Active Member

Dec 1, 2002

2,055

1

48

Camas Washington

Sep 16, 2005

#8

• Sep 16, 2005

• #8

Gearjamer said:

I'm going to be looking into having the frame checked and fixed if nessassary. My final plan is to install a MM k-member and Evolution Motorsports Tri-link with watts link out back. I'll have some extra parts left over if anybody is interested.
Global West track link, caster camber plates, front control arms with Del-a-lum bushings, and springs.

-Bill

Click to expand...

Ya know if youre already going with MM up front, they make a pretty damn good 3 link (torque arm) for the rear... just a thought.

DD