Who's put new hubs on SN spindles?

Snikt89GT · Oct 24, 2006

Just curious what the best way to do this is. I just got my 94-95 spindles from ebay today, i'm glad I decided to buy new hubs. The ones that came on the spindles are pretty grizzly.

I bought new dust caps, spindle nuts, and DCA hubs. Is it even possible to remove and install new hubs with the spindles off the car? What size is the spindle nut?

How do you guys torque these bolts? I plan on going to 250ft-lbs but my torque wrench is a standard clicking type that goes up to 150. Do I need to borrow someone's big ass torque wrench?

Thanks

*edit* I guess this should be in tech

dbdragracing · Oct 24, 2006

i would like to know too

Shakerhood · Oct 25, 2006

I did mine at Work where I had access to a larger Torque Wrench I just put it in the Vice. Make sure you use new Nuts and if I remember correct they were 36mm.

stang8urimport · Oct 25, 2006

Yep, 36MM socket... And I believe the torque is 250?? I know it's around there... but don't quote me.

SVT32VDOHC · Aug 22, 2007

I know this is an old post, but 250 fl lbs is correct. I just let the impact do the work, I didn't have a tq wrench that big either. They made a huge difference. Car is quiet as new at 100+MPH. The old ones didn't even sound bad either, they were smooth, but the new ones were better.

Shakerhood · Aug 23, 2007

The Actual Torque Spec is 190-250 Ft Lbs. A Torque Wrench is prefered over an impact Gun as the wrong Torque can screw up those expensive Hubs!

Who's put new hubs on SN spindles?

Snikt89GT

New Member

dbdragracing

Member

Shakerhood

stang8urimport

Autozone Junkie

SVT32VDOHC

waiting for the next hack atta

Shakerhood

Similar threads

Who's put new hubs on SN spindles?

Snikt89GT

New Member

dbdragracing

Member

Shakerhood

stang8urimport

Autozone Junkie

SVT32VDOHC

waiting for the next hack atta

Shakerhood

Similar threads

Privacy & Transparency

Privacy & Transparency