• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Why doesn't my fuel gauge work?

  • Thread starter Thread starter Mr_Q
  • Start date Start date Jan 5, 2006

Mr_Q

Founding Member
Nov 5, 2002
721
8
48
Burbank, CA
Jan 5, 2006
#1
  • Jan 5, 2006
  • #1
Stuck on "E".

Any ideas? Is this one of those common issues that everyone has a fix for?
 
B

Bladez5_0

Founding Member
Apr 14, 2001
460
0
17
Goose Creek, SC
Jan 5, 2006
#2
  • Jan 5, 2006
  • #2
Float may have slipped or stuck, wiring to tank sending unit may be loose/unhooked, connection on back of gauge may be loose/unhooked.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 5, 2006
#3
  • Jan 5, 2006
  • #3
Agreed with Bladez

Dont forget about the anti-slosh module (if 90's have them. Early aero foxes did). A bad connection there would keep the gauge from articulating.

Good luck.
 

Mr_Q

Founding Member
Nov 5, 2002
721
8
48
Burbank, CA
Jan 5, 2006
#4
  • Jan 5, 2006
  • #4
HISSIN50 said:
Agreed with Bladez

Dont forget about the anti-slosh module (if 90's have them. Early aero foxes did). A bad connection there would keep the gauge from articulating.

Good luck.
Click to expand...

So when I change my dash bulbs if the fuel wire is connected...I'm gonna have to drop the tank and replace stuff in there most likely? Wouldn't be so bad if my fuel pump was bad and needin fixins, but it's fine, even quiet!
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 5, 2006
#5
  • Jan 5, 2006
  • #5
The issue can really be anywhere along the entire system, from gauge to sending unit. If the wire is open (is cut), that can be along the entire run from dash to tank. Ohming out the sending wire could be revealing. And tracing the sending unit wiring as far from the dash as you can (when you have the cluster opened up) is a place to start.

I kinda have the feeling the issue is more likely to be at the tank-end of things though. We will see if Bladez agrees.

Good luck.
 

mustangphil

Founding Member
Jul 9, 2002
21
0
48
No longer The Beach
Jan 5, 2006
#6
  • Jan 5, 2006
  • #6
Mr_Q said:
So when I change my dash bulbs if the fuel wire is connected...I'm gonna have to drop the tank and replace stuff in there most likely? Wouldn't be so bad if my fuel pump was bad and needin fixins, but it's fine, even quiet!
Click to expand...
Trust me my friend, it's not as bad as it seems. I literally just got out of the shower from doing this job. It took me at most hour and a half and that's including going to the store to get me a new 2 ton aluminum jack My gas gauge needle was showing so full it was off the scale. Here is why, this is how I pulled my sending unit.
View attachment 492201
This is what it should look like:
View attachment 492203
And can anyone tell me what could have caused one of the metal corners to bend like this?
View attachment 492205
Like I said, it's not that big of a deal to drop the tank.
3 Bolts
2 Fuel lines
2 Wire harnesses (fuel pump & sending unit)
and the filler tube, which I didn't even pull out all the way.
 

LilRedPony

New Member
May 12, 2003
31
0
0
Arizona
Jan 5, 2006
#7
  • Jan 5, 2006
  • #7
I would start by checking the fuel sending unit. I just replaced mine while doing the fuel pump and after 6 years with no fuel guage its finally working
Put a multimeter on the sending unit to check its resistance through its range of motion, resistance should increase as the float moves up. Good luck.
 

grey5.0beast

Cookies should never be DUNKED!!!
Aug 3, 2004
0
1
0
atl ga
Jan 5, 2006
#8
  • Jan 5, 2006
  • #8
Check all cnnections but with my truck apon acceleration the guage moves up and deceleration it goes down, weird! Not even due to sloshing
 

Mr_Q

Founding Member
Nov 5, 2002
721
8
48
Burbank, CA
Jan 5, 2006
#9
  • Jan 5, 2006
  • #9
Thanks everyone. I'll check the connection when I do the dash bulbs and then I'll drop the tank when I get some time. Looks like that fuel sender part is around $80-$90? I don't want to go through the trouble of installing a used part so I guess it's worth it. Kind of like door lock motors. If I'm tearing my door apart, I don't want to do it again for another 15 years.
 
You must log in or register to reply here.

Similar threads

C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
F
Engine 1988 Foxbody idle issues
  • fernandosgarage55
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Apr 30, 2026
AeroCoupe
8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
355
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
273
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
S
thread no longer needed
  • skidad
  • Oct 17, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
146
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
skidad
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?