Will 1.7rr's clear or not?

[Makdaddymac]

hey all ive searched and keep getting mixed review i got a set of crane cams 1.7rr to go with my gt40's and i need to know what o do about the valve covers... Will it clear or not. Some say they have had problems other say they clear. Some say to just grind down the baffle, and i also heard of super gluing gaskets together!!!! What is the real deal?

 

[*TURBO GT*]

The rockers will fit you may or may not have to remove the baffle or do the 2 gasket trick

 

[Makdaddymac]

another may or may not have to!!!!!!!!!!!!!! lol...
what the heck i know im not the only 1.7 rr crane cam guy

 

[*TURBO GT*]

if u remove the baffle they fit my buddy runs them so either do the baffle or 2 gasket trick i would do the baffle

what cam r u running ?


just put them on already

 

[Makdaddymac]

just grind them down with a die grinder or what?

 

[cenok is family]

i had to remove and grind down the baffle to make them clear my stock VC's. yeah just use a die grinder. but then oil was getting sucked up into my intake so i sprung for some 95 cobra VC's. they're stamped steel instead of aluminum but the area around the oil fill neck and baffle is raised to clear these exact rocker arms.

 

[Makdaddymac]

ah i just glue some gaskets toghether...lol......

 

[Makdaddymac]

will 1.7s mess up the speed density?

 

[*TURBO GT*]

not with a stock cam

 

[LaserSVT]

It might