Will a FOX P/S pump work on a 94-95?

Saleen302 · Aug 1, 2005

Will it work? I have the existing pulley and bracket. Will it bolt right up? Any differences? Thanks!

CManT1914 · Aug 1, 2005

I am thinking the only differences were in the diameter of the pulley itself, but I'm not sure. Cus a buddy of mine had a spare fox pulley he would have given me when I bent mine, but they are different sizes I think. Free bump for you.

MdntRanger50 · Aug 1, 2005

The plastic housing/reservoir is different between the two where the return line nipple is. The fox nipple points straight down and will interfer with the 94-95 bracket, can't get the return line on it. Either pump will bolt to either bracket. Pulley size is different and the 94-95 pulley sits in closer to the engine for the shorter front dress.

VibrantRedGT · Aug 1, 2005

Won't work, two different part numbers all together.

BlackVert · Aug 1, 2005

MdntRanger50 said:
The plastic housing/reservoir is different between the two where the return line nipple is. The fox nipple points straight down and will interfer with the 94-95 bracket, can't get the return line on it. Either pump will bolt to either bracket. Pulley size is different and the 94-95 pulley sits in closer to the engine for the shorter front dress.

i have one in my garage to prove it. the idiot at advance ordered the wrong one and the idiot with the car (me) lost the receipt and sat on it for 6 months. now i'm stuck with it.

kck6894 · Aug 2, 2005

I put a fox pump on my car. Seems to work fine. The Fox pump is actually the same pump as the 94 up V-6 pump. I used my resivor and pulley and it went right in.

BlackVert · Aug 2, 2005

kck6894 said:
I put a fox pump on my car. Seems to work fine. The Fox pump is actually the same pump as the 94 up V-6 pump. I used my resivor and pulley and it went right in.

did you install it yourself? was the return line nipple L shaped or straight?

SorsCode · Aug 2, 2005

the pump itself is the same. Just swap over your resivor.. removing the resivor is very easy.

kck6894 · Aug 2, 2005

BlackVert said:
did you install it yourself?

yes I did.

SorsCode said:
the pump itself is the same. Just swap over your resivor.. removing the resivor is very easy.

yup just like he said. Use your factory pulley and resivor. If you remove the big nut(valve) that your pressure side hose connects to the resivor will slide off the pump. Install your resivor, put it back on the bracket and reinstall the pulley. Simple and easy job!

Saleen302 · Aug 7, 2005

Thanks! It worked out just like you said it would...

1994Vib.RedGT · Aug 7, 2005

yea, I thought the power steering pump was the same one used since like the 1970s.

kck6894 · Aug 7, 2005

Saleen302 said:
Thanks! It worked out just like you said it would...

Glad to see it worked ok for you!

Ford started using that pump in the late 70's. The books list many different pumps but they all look the same. I think then only real differance was the valving and the resivores. If you switch both of those I believe they are pretty universal. it's about time they made atlest one universial part

Will a FOX P/S pump work on a 94-95?

Saleen302

New Member

CManT1914

New Member

MdntRanger50

Member

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

BlackVert

kck6894

Advanced Member

BlackVert

SorsCode

kck6894

Advanced Member

Saleen302

New Member

1994Vib.RedGT

Member

kck6894

Advanced Member

Similar threads

Will a FOX P/S pump work on a 94-95?

New Member

New Member

Member

"STANGNET'S PENGUIN SMACKER"

Advanced Member

Advanced Member

New Member

Member

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency