• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Will a stock replacement clutch live on a stroker with street tires???

  • Thread starter Thread starter juiced_94gt
  • Start date Start date Oct 25, 2008

juiced_94gt

Active Member
Mar 30, 2005
1,143
0
36
Southern California
Oct 25, 2008
#1
  • Oct 25, 2008
  • #1
When I was building my motor a builder around here that races at irwindale told me that I could put a stock clutch in the car as long as it's on street tires, he said that the car would break the tires loose before a clutch or tranny went south...Is this correct?? sounds logical.
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Oct 25, 2008
#2
  • Oct 25, 2008
  • #2
juiced_94gt said:
When I was building my motor a builder around here that races at irwindale told me that I could put a stock clutch in the car as long as it's on street tires, he said that the car would break the tires loose before a clutch or tranny went south...Is this correct?? sounds logical.
Click to expand...

It depends on how you drive. I would have at least stepped up to a King Cobra or even better Ford Heavy Duty OEM replacements.

If you're launching at 5000 RPM at the track, you'll eat up OEM clutches in no time. If you're cruising around and taking it easy, you'll be fine.

Adam
 

Yobi1Kanobi

Member
Apr 9, 2003
559
0
16
Oct 25, 2008
#3
  • Oct 25, 2008
  • #3
cruising you wont have a problem, If you hammer it even rolling you might break the clutch loose some and cause wear.

But like previously post you should step it up. The clutch isnt something that you want to keep replacing. Its worth the money up front you will save alot of time , labor , and headaches
 

juiced_94gt

Active Member
Mar 30, 2005
1,143
0
36
Southern California
Oct 25, 2008
#4
  • Oct 25, 2008
  • #4
I was just wondering. I have a Mc Leod in there right now but it's kinda hard on the leg since I hit traffic over two hours a day. Maybe a twin disk then?
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,302
1,645
214
Acworth, GA
Oct 25, 2008
#5
  • Oct 25, 2008
  • #5
Stock clutch sounds like a bad idea to me.

Kurt
 

SQUEEZE&STROKE

New Member
Jun 24, 2005
0
0
0
SOUTHERN CA
Oct 25, 2008
#6
  • Oct 25, 2008
  • #6
juiced_94gt said:
I was just wondering. I have a Mc Leod in there right now but it's kinda hard on the leg since I hit traffic over two hours a day. Maybe a twin disk then?
Click to expand...

I have heard that the twin discs are just as hard...and can be noisy. A buddy had one in his G force t-5...but the trans was so loud (dog cut synchros) that it was hard to tell between clutch and trans noise.
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Oct 25, 2008
#7
  • Oct 25, 2008
  • #7
SQUEEZE&STROKE said:
I have heard that the twin discs are just as hard...and can be noisy. A buddy had one in his G force t-5...but the trans was so loud (dog cut synchros) that it was hard to tell between clutch and trans noise.
Click to expand...

:OT:Its not the synchros that are "dog cut" its the actual gears. Instead of a helical cut gear set with synchros, "dog box" transmissions have straight cut gears and don't have synchros at all.

With no synchros, you have to double clutch at EVERY down shift, which is pretty hard core, and not for a street car, IMO. They make good drag transmissions though for numerous reasons, but thats another topic.

Adam
 

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
Oct 25, 2008
#8
  • Oct 25, 2008
  • #8
Should be fine if you drive like an old lady....Personally when I put the stroker motors in my cars, I drive them...why dump all that coin and make power you won't use? I've taken brand new oem clutch discs out in 2 or 3 pieces w/ some spirited driving after 30 miles on basically stock 5.0's....If you going to spend the money on a motor at least back it up w/ a decent clutch that will hold some power. Then again if you get a clutch that holds too well, it ends up finding the other weak links in your drivetrain so just something to keep in mind....been down that road as well...I'd rather my clutch slip a little rather than destroy my trans etc...but not have something so weak I couldn't be able to drive it hard.
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Oct 25, 2008
#9
  • Oct 25, 2008
  • #9
Generally Speaking

Yes ... I can go along with your builder friend

Street tires should break loose before the clutch does

Steep ratio will help take some of the load off the clutch as well

NOW!

If you wanna do sticky tires or dump it from a standing start
or
Stuff similar to that

No ... the little OEM clutch will give up the ghost quickly

Like Adam says ... It depends!

Some folk can tear up BB's & Bowling Balls
with
Nothing but their bare hands

Grady
 
You must log in or register to reply here.

Similar threads

SOLD Sold.
  • TTSaleen
  • Jul 1, 2026
  • Engine and Power Adder
Replies
6
Views
324
Engine and Power Adder Jul 2, 2026
Noobz347
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
220
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
What's it Worth? 2000 GT
  • Mustang5L5
  • May 8, 2026
  • What is it Worth?!?!?
Replies
6
Views
320
What is it Worth?!?!? Jun 13, 2026
KRUISR
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?