will my block last

murphmaster5

New Member
Oct 2, 2005
115
0
0
PA
i wanna build up my car during winter and i wanna know if i could use my present motor im not sure how many miles are on it iv only had it for about a year the dash sas 90k but not sure the motor runs awsom being stock, i plan to run nitrous is there a way to check my shortblock to see if it is worth saving the money for new shortblock by visual or testing
 
You should do a compression test and then go over your motor once it's out to make sure it is capable of your plans...

FWIW: The SBF in the Fox cars is a very strong motor for build ups up till 450 RWHP.... Then you are on barrowed time
 
90k isn't a lot of miles on a 5.0 if it was maintained properly. Many guys here start modding with 100k+ miles, running boost, NOS, higher compression, you name it. Do a compression test if you're overly concerned, but if it's running strong now, chances are, you're still in good shape for future mods.
 
No, you need the heads attached to the block to do the compression test.

If the heads are off though you can probably get by with a visual inspection of the cylinder walls / pistons and heads.
 
How do the cylinder walls look/feel? If you can still see a good crosshatch pattern, and can't feel a lip toward the top where the ring comes up to, you're probably good to go. I got a used Explorer engine, and the cylinders looked like they were freshly honed, but it has 62k miles on it.