• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

will my block last

  • Thread starter Thread starter murphmaster5
  • Start date Start date Oct 28, 2005
M

murphmaster5

New Member
Oct 2, 2005
115
0
0
PA
Oct 28, 2005
#1
  • Oct 28, 2005
  • #1
i wanna build up my car during winter and i wanna know if i could use my present motor im not sure how many miles are on it iv only had it for about a year the dash sas 90k but not sure the motor runs awsom being stock, i plan to run nitrous is there a way to check my shortblock to see if it is worth saving the money for new shortblock by visual or testing
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Oct 28, 2005
#2
  • Oct 28, 2005
  • #2
You should do a compression test and then go over your motor once it's out to make sure it is capable of your plans...

FWIW: The SBF in the Fox cars is a very strong motor for build ups up till 450 RWHP.... Then you are on barrowed time
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 28, 2005
#3
  • Oct 28, 2005
  • #3
90k isn't a lot of miles on a 5.0 if it was maintained properly. Many guys here start modding with 100k+ miles, running boost, NOS, higher compression, you name it. Do a compression test if you're overly concerned, but if it's running strong now, chances are, you're still in good shape for future mods.
 
L

luckythirteen13

New Member
Jul 19, 2005
648
0
0
Anaheim, CA
Oct 28, 2005
#4
  • Oct 28, 2005
  • #4
check compression and leak down and if they check out, you should be good go mod. 90k miles is really low, assuming its not 190k. im running 403rwhp and my stock block and stock internals are at 101k
 
M

murphmaster5

New Member
Oct 2, 2005
115
0
0
PA
Oct 29, 2005
#5
  • Oct 29, 2005
  • #5
can u do a compression test if the heads are off already because thay are
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Oct 29, 2005
#6
  • Oct 29, 2005
  • #6
No, you need the heads attached to the block to do the compression test.

If the heads are off though you can probably get by with a visual inspection of the cylinder walls / pistons and heads.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 29, 2005
#7
  • Oct 29, 2005
  • #7
How do the cylinder walls look/feel? If you can still see a good crosshatch pattern, and can't feel a lip toward the top where the ring comes up to, you're probably good to go. I got a used Explorer engine, and the cylinders looked like they were freshly honed, but it has 62k miles on it.
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Oct 29, 2005
#8
  • Oct 29, 2005
  • #8
srothfuss said:
No, you need the heads attached to the block to do the compression test.

If the heads are off though you can probably get by with a visual inspection of the cylinder walls / pistons and heads.
Click to expand...



murph, are you on a tight budget at all??
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 29, 2005
#9
  • Oct 29, 2005
  • #9
super302 said:
murph, are you on a tight budget at all??
Click to expand...
why, gonna sell another car? :SNSign:
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Oct 29, 2005
#10
  • Oct 29, 2005
  • #10
StangGT1995 said:
why, gonna sell another car? :SNSign:
Click to expand...
what??

actually, i am selling my car (keep it on the low low :ZipIt: )
 
M

murphmaster5

New Member
Oct 2, 2005
115
0
0
PA
Oct 30, 2005
#11
  • Oct 30, 2005
  • #11
yep im pretty much tight on money
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Oct 30, 2005
#12
  • Oct 30, 2005
  • #12
Pretty easy to bolt the heads back on to run a cranking compression or leak down tests....
 
You must log in or register to reply here.

Similar threads

F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
219
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
135
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2026
AeroCoupe
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
Engine Contour fan CFM
  • Mustang5L5
  • Apr 6, 2026
  • Fox 5.0 Mustang Tech
Replies
13
Views
706
Fox 5.0 Mustang Tech May 22, 2026
qikgts
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?