will stock calipers work?

i just sold a set of 95 rebuilt factory calipers on e-bay for $40 including shipping...if i were you i would do the factory 1999-2004 mustang pbr double caliper brake upgrade its fairly inexpensive and the benefits are great..click on link and view sections 3 and 4 http://www.sn95brakes.com/sn95brakes.php heres a pic. of my pbr double caliper upgrade..
pbrbrakecaliper7-7-06001.webp
 

Attachments

  • pbrbrakecaliper7-7-06001.webp
    pbrbrakecaliper7-7-06001.webp
    27 KB · Views: 123
yeah, but if he uses the pbr non-cobra (GT) calipers, those 94-95 spindles will require a bit of grinding. it's always better to spring for the cobra calipers and rotors, unless you cant afford the wheels to hide them behind.
 
you might be better off talking with the guy in the link below(click on ask seller a question) i would offer him $250 shipping included to end bid early on this e-bay listing and see if he will accept it has 2 days left with no bids you may get lucky...and its a 99 or better system with the pbr double piston brakes...a junkyard will probably charge more than that if you even find one with stang parts there hard to find in some places...
http://cgi.ebay.com/ebaymotors/5-LU...ryZ33558QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
 
I dont understand all these posts, if you are going to be doing a upgrade get all the stuff you need THEN make the change. Use stock calipers on 5 lug brakes...lol Seems here recently everyone is wanting to do things half @ss. Done venting....thanks