Will this work?

[RsStanG1987]

If i have a stock 88gt can i swap sn95 axles into the rear?

 

[RsStanG1987]

Just asking for a friend..

 

[marine_2003]

the SN95 axles are 3/4 longer but they will go in.

 

[RsStanG1987]

the SN95 axles are 3/4 longer but they will go in.

But they will work with no problems correct?

 

[Hickfied]

Won't they hit the cross pin?

 

[marine_2003]

Won't they hit the cross pin?

What do you mean crosspin?

I had put a set in the 8.8 I had in my 85, with no problems.

 

[Hickfied]

I beleive it is called the carrier pin?

 

[795.0pacecar]

No, but they will stick out the ends of the axle tubes 3/4" more than the stock ones, and push your wheels that much further out.

 

[RsStanG1987]

No, but they will stick out the ends of the axle tubes 3/4" more than the stock ones, and push your wheels that much further out.

Did you mean yes?

 

[N8Miller]

i have no problems with my 95 cobra axles.

 

[ram360]

matter if it's from a 94-95 w/ a 7.5" rear or does it have to be a gt 8.8" anybody know?

 

[N8Miller]

matter if it's from a 94-95 w/ a 7.5" rear or does it have to be a gt 8.8" anybody know?

same axles.

 

[ram360]

same axles.

sweet now just wondering If I'll have to convert to rear discs w/ the longer sn axles or be able to keep the stock drums?

 

[795.0pacecar]

Did you mean yes?

I was answering the question about the axles hitting the carrier pin.

 

[ram360]

anyone know if you can keep the rear drums w/ the longer sn95 axles or do you have to go rear disc?

 

[795.0pacecar]

If you want 5 lug drum brakes, you need to use ranger or areostar axles. If you try to use SN95 axles with drums they will push the drums out so far that you would barely get any brake contact.

 

[ram360]

If you want 5 lug drum brakes, you need to use ranger or areostar axles. If you try to use SN95 axles with drums they will push the drums out so far that you would barely get any brake contact.

ok, that's what I was thinking might happen. I might just go discs in the rear. if I can find the parts. thanks