• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Will Trick Flow Twisted Wedge heads work?

  • Thread starter Thread starter 85mustang
  • Start date Start date Aug 23, 2005
  • 1
  • 2
Next
1 of 2 Next Last
8

85mustang

New Member
Sep 25, 2004
1
0
0
Aug 23, 2005
#1
  • Aug 23, 2005
  • #1
I plan on building a 351w stroker in the near future and would like to know if the twisted wedge heads will work. I plan on supercharging it. I know they will bolt up if u elongate the holes to 1/2'' but not sure if they will flow enough even with them ported. I plan on it bein a 408 with pushing a decent amount of boost.
 

Daniel50

New Member
Mar 30, 2005
716
1
0
Discovery Bay, CA
Aug 23, 2005
#2
  • Aug 23, 2005
  • #2
i would suggest afr 185's or 205's with a 351w
 

HardmanGT

Founding Member
Oct 5, 2001
500
0
17
Thomaston, CT
Aug 23, 2005
#3
  • Aug 23, 2005
  • #3
The Twisted Wedges heads are good, but that is based on a 302. Witht that 408 plan on something that will flow much more than they will. AFR 205 or 225 would be my choice
 
9

9 Deuce GT

Member
Dec 10, 2003
550
1
16
Geneva, NY
Aug 24, 2005
#4
  • Aug 24, 2005
  • #4
If you prefer a TFS head over the others, look into their ported heads. They are relatively new to TFS, but have shown good results in the mags, (if you actually beleive those things. lol)
 

9T3SVT

New Member
Apr 18, 2004
84
0
0
Aug 24, 2005
#5
  • Aug 24, 2005
  • #5
If you go with the TFS heads, get them Here , free shipping on orders over $300 and that is a great price.

I'd get AFR's but my opinion is biased
 

281pony

Active Member
Aug 31, 2003
2,681
2
46
Oly, WA
Aug 24, 2005
#6
  • Aug 24, 2005
  • #6
i think the trickflow R heads or whatever would work decent on a 351 based stroker, or am i way off?

otherwise, im with everyone else on a 205 or 225 afr head. especially if you are adding boost.
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#7
  • Aug 24, 2005
  • #7
Right here!

Im runing a 408 with TEA ported TFS Track Heats heads.It makes awsome power and torque.

They would make great blower heads and are excellant turbo heads.My set-up now is a higher compression (11.5-12:1) nitrous set-up,and the heads work perfectly.Oh,I run a Hyd. roller cam,with biggger valves (mine are 2.02/1.60) and springs you can run a solid roller and they would be wild.
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 24, 2005
#8
  • Aug 24, 2005
  • #8
TFS TW's will work great. They have the most efficient combustion chamber of any head sold. I think that they are the best head available. On a 408 I would recommend getting the ported ones or the R's. Although they are a nice head, I don't really care for AFR's. I've used both the TFS and the AFR's and I have always run better with the twisted wedge heads. I actually spoke to Rick Anderson once on the phone and he's the one that explained to me why the Teisted Wedge is a better choice than an AFR. He didn't knock the AFR's....he just said they a require a little more effort to make them work well. Just my $.02 .
 
S

stroked86

New Member
Jul 23, 2002
25
0
0
ct
Aug 24, 2005
#9
  • Aug 24, 2005
  • #9
twisted wedge heads will work, they should already have the 1/2 inch headbolt holes and the cnc'd heads will work better for the price...

R heads flow well even out of the box but require pistons and headers becuase of port location and also valve angles they may also require shaft rockers not sure on that though

AFR heads are far better then trickflow especially the 205 or the 225 heads they are in a class above a better comparison would be the 185's but even those work better, the advantage for trickflow is for class specific stuff for racing that dont allow porting like real street in the NMRA. for a 351 based stroker the 205 or 225 is cheaper then what the cost would be to get a tw head close in performance to either plus AFR gives you an exhaust port options.... for bolt on performance for around 2k the 225 will out perform the cnc'd Tw head
 

$uperstang

New Member
Jul 20, 2004
476
1
0
Detroit, MI
Aug 24, 2005
#10
  • Aug 24, 2005
  • #10
Get the AFR's trust me I went through the whole thing when I built my motor and AFR's are better. For your set up go with the 225 AFR's
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Aug 24, 2005
#11
  • Aug 24, 2005
  • #11
All answers here have been opinions?

Can someone post some flow numbers for TrickFlows and AFR's?
Flow numbers are not directly linked to hp, but flow numbers should be easier to find than side by side dyno comparisons.

I am running the 408w in my sig with gasket matched TW heads. Even though I am still having vac leak/oil control issues the power is great. Exactly what I expected. Then again, maybe I would be better off with AFR's?

The reason I went with TW heads was that the chambers are twisted. This allows for better breathing through the valves at a given lift and valve diameter. It also helps to create better swirl characteristics inside the cyl. Because the swirl effect will not be seen in flow tests, TW heads are better than their flow numbers will indicate.

edit:
I should add that my combo is set up for boost, 9-12lbs worth if I get my way.
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 24, 2005
#12
  • Aug 24, 2005
  • #12
Lift 0.5 0.55 0.6
AFR 185 267,185 273,190 277,191
AFR 205 291,225 306,231
AFR 225 268,242 307,250
TFS TW 251,187 251,193
TFS R 275,200 296,212

This is a biased comparison because the TFS heads are all unported. The TFS R heads are meant to be ported and they do not list the flow #'s for the new CNC'd versions online. Although you can port them more, an AFR is a CNC ported head. The twisted wedge is between an AFR 165 and 185 in runner volume. Hope my quickie chart helps.
 

QDRHRSE

New Member
Dec 31, 2002
1,590
0
0
Palmdale, CA
Aug 24, 2005
#13
  • Aug 24, 2005
  • #13
oops. That didn't come out as nice as I would have liked. only the AFR 185's have #'s @ .550. The rest are @ .500 and .600
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#14
  • Aug 24, 2005
  • #14
QDRHRSE said:
oops. That didn't come out as nice as I would have liked. only the AFR 185's have #'s @ .550. The rest are @ .500 and .600
Click to expand...

Ill make a chart.I made this exact comparo befor...

I sereached ut nothing on the TFS vs. AFR thread.Maybe it whent down thiw the crash...
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#15
  • Aug 24, 2005
  • #15
TFS "Twisted Wedge" (Standard/Emissions Legal)
170cc Intake/66cc Exhaust

Lift Value: Intake Flow: (CFM) Exhaust Flow: (CFM)

--------------------------------------------------------------------------------

0.100" 63 53
0.200" 141 107
0.300" 205 144
0.400" 233 171
0.500" 251 187
0.600" 251 193

TFS "Track Heat" (Twisted Wedge,non EGR,non Emission)
170cc Intake/66cc Exhaust

Lift Value: Intake Flow(CFM): Exhaust Flow(CFM):

--------------------------------------------------------------------------------

0.100 63 53
0.200 141 107
0.300 205 144
0.400 233 171
0.500 251 187
0.600 251 193

TFS "Street Heat" (High-Port,Emissions Legal)
192ccIntake/87cc Exhaust

Lift Value: Intake Flow: (CFM) Exhaust Flow: (CFM)

--------------------------------------------------------------------------------

0.100" 67 55
0.200" 133 103
0.300" 186 138
0.400" 230 166
0.500" 257 183
0.600" 267 193

TFS "Twisted Wedge R" (Raised exhaust port,R-Specific header,non Emissions)
206ccIntake/96cc Exhaust

Lift Value: Intake Flow(CFM): Exhaust Flow(CFM):

--------------------------------------------------------------------------------

0.100 68 50
0.200 147 102
0.300 205 146
0.400 242 178
0.500 275 200
0.600 296 212
0.700 305 222

Notes:All TFS heads,excluding "Twisted Wedge R",use 2.02 Intake and 1.60 Exhaust valves.
Standard TFS Twisted Wedge springs are good up to .540" lift Hyd. roller,
Track Heat and Street Heat are good to .600" lift with Hyd. roller cam,
TFS "R" heads are good to .700" lift with solid cam

All TFS head test Conducted at 28" of water (pressure)
______________________________________________________________________
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#16
  • Aug 24, 2005
  • #16
AFR 185cc Emission Legal heads
(185ccIntake/69cc Exhaust,2.02Intake/1.60 Exhaust)

Valve Lift (Inch's) Intake (CFM) Exhaust (CFM)

.100" N/A N/A
.200" 129 118
.300" 189 153
.400" 234 178
.500" 267 185
.600" 277 191

AFR Note: exhuast w/ 1 3/4 pipe,bore size 4.060
---------------------------------------------------------------------------------------------
AFR 185cc Non-Emission heads
(185ccIntake/69cc Exhaust,2.02Intake/1.60 Exhaust)

Valve Lift (Inch's) Intake (CFM) Exhaust (CFM)

.100" N/A N/A
.200" 129 118
.300" 189 153
.400" 234 178
.500" 267 185
.600" 277 191

AFR note: exhuast w/ 1 3/4 pipe,bore size 4.060
---------------------------------------------------------------------------------------------
AFR 205cc (non-Emissions)
(205ccIntake/70cc raised exhaust,2.08Intake/1.60 Exhaust)

Valve Lift (Inch's) Intake (CFM) Exhaust (CFM)

.100" N/A N/A
.200" 141 125
.300" 201 180
.400" 251 211
.500" 291 225
.600" 301 228
.700" 310 235

AFR Note: exhaust w/ 1 7/8 pipe,bore size 4.125
---------------------------------------------------------------------------------------------
AFR 225cc (non-Emissions)
(225ccIntake/80cc .375 raised exhaust,2.08Intake/1.60 exhaust)

Valve Lift (Inch's) Intake (CFM) Exhaust (CFM)

.100" N/A N/A
.200" 143 130
.300" 211 190
.400" 260 230
.500" 289 242
.600" 307 250
.700" 317 255

AFR Note: exhaust w/ 1 7/8 pipe,bore size 4.125

AFR did not state at how many inch's of water (pressure) they tested with.

______________________________________________________________________
This information was taken from Trick Flow Specialties and
Air Flow Research respected web sites:

www.trickflow.com
www.airflowresearch.com

_____________________________________________________________________
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#17
  • Aug 24, 2005
  • #17
There you go...Ill also make a chart with the TEA ported TFS heads.
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#18
  • Aug 24, 2005
  • #18
TEA Ported TFS "Twisted Wedge/Track Heat" heads

TW 185
Lift Intake Exhaust
.100" 72 58
.200" 142 114
.300" 215 152
.400" 259 189
.500" 287 220
.550" 296 229
.600" 300 234
____________________________________________________________________

TW 205
Lift Intake Exhaust
.100" 71 58
.200" 143 114
.300" 221 152
.400" 271 189
.500" 301 220
.550" 308 229
.600" 315 234

____________________________________________________________________

TW 205 "Renegade"
Lift Intake Exhaust
.100" 57 53
.200" 149 111
.300" 228 155
.400" 283 203
.500" 314 228
.550" 320 233
.600" 325 240

_____________________________________________________________________

TEA Ported TFS "High Ports (a.k.a "Street Heats")

Hi Port 218
Lift Intake Exhaust
.100" 72 58
.200" 144 117
.300" 205 162
.400" 261 203
.500" 295 229
.550" 307 232
.600" 316 236
.700" 332 241

_____________________________________________________________________

Hi Port 230
Lift Intake Exhaust
.100" 75 58
.200" 148 117
.300" 216 162
.400" 267 203
.500" 292 229
.550" 304 235
.600" 313 241
.700" 335 252

NOTE: Information taken from www.totalengineairflow.com
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Aug 24, 2005
#19
  • Aug 24, 2005
  • #19
I run TEA 205cc Track Heats on min,I love them.But the AFR 225 was also a good choise,I just happened to have the un-ported Track Heat to send in from the previous 357.
 

payupsucka

Member
Sep 28, 2003
324
0
16
Keeping it grimy in Fall river MA.
Aug 24, 2005
#20
  • Aug 24, 2005
  • #20
brodix track 1 heads muscle mustangs did a 408 build up and thats what they used motor put close to 700 with those heads
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Engine Forged flat top pistons from 5.0 fit a 351 build?
  • PonyGTrider
  • May 22, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
2K
Fox 5.0 Mustang Tech Feb 1, 2026
PonyGTrider
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
833
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
163
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
383
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
483
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?