Today I finally put in the window reg in my 98 gt. I reglued the bracket and glued on a support piece on each side of the bracket. Everything went together ok,I used bolts to re-install the window not rivets. There is only 1 problem the window only goes half way down then the reg seems to bind up. I'll look at it tomorrow but in the mean time any of thoughts or suggestions would be appreciated.The reg seemed to cycle ok when the window was not bolted to the regulator.Also when I took the old reg out the motor was positioned in the middle of the semi-ring gear so thats the way I installed the new one could that be the problem?
window regulator update
- Thread starter driftin luke
- Start date
flstang65
10 Year Member
I am not understanding what you are talking about with the gluing. I have never had to re glue anything when changing out window regulators.
Similar threads
