window switches please help!!!!

[zeusmoto]

alright i have a few questions i recently have tried making my window motors work, and i have found out they were good, i also found out that when the last wire touches the copper terminal on the window switch the window rolls down i personally think my switch is the problem does anyone know where i can get one for cheap? i have tried the local junk yards but with no luck.
-question two what is the reason my window is not to steady and shakes when the window is partly rolled down, or when i close my door the window like shakes back and forth and sounds like it isnt secure. whats the deal
-and last question can anyone give me the wiring diagram for the passenger side power door locks? i know there are a few pink and some blacks i think, so it is hard to tell


thanks
jerry

 

[zeusmoto]

no one wants to help?

 

[HISSIN50]

well Jerry, i will try again and bump you.
LRS (www.50resto.com) might have switches. dont know about price, but probably not cheap. otherwise ebay, used stang parts places online, etc.

if the adjustment is like on 87 on up, there is a bolt on the window track at the top and bottom. bottom one is under the door. top is in the inside of the door skin, as i recall. make sure they are snug.
when the window is part down and you can see it rattle around (like it is not tight on the track), that suggests bushings. there are two as i recall. when i swapped doors, i needed a new top one and rigged the bottom one from my old door to fit the top. as i recall, they were not expensive to order (like 15 bucks, i could be wrong).
that is what i know. good luck bud.

 

[five_o_stang]

Mustang Parts Specialties should have em ( www.mustangpartsspecialties.com )....i've bought a few from there (they gave me some free one time when I was up at their location...it's usually the switch anyway...iv'e had several sets on the passenger side go out.

 

[FOOT2DFLOOR]

you could also try Texas Mustangs site.

 

[zeusmoto]

yeah thanksa lot guys, really helps. my window switch is for an 86 so i need the stupid switches that are in the door panel not on the armrest. unless anyone can tell me how easy it is to convert the switch place to the armrest????

 

[Mach428]

I would also recomend 50resto.com, we've bough alot of replacement parts from them.