Windshield Weatherstrip where to buy!

Hello I need to replace the weatherstrip that runs along the edge of the windshield molding on my 93 LX covertable. Its about 1/4 in wide and run the up the sides and across the top of the windshield. I have only been able to find any info. about it on one site and is sold in two pieces, LH,RH .

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-03160A%20%20%20%20%201&comp=LRS

Just wanted to ask if this is what I want and if there is any other place i can get it just so I can compare prices and such. Thanks

This is a great forum!

I see lots have viewed my question but no one has responed to it. So I ordered it from them, I'll let you know how it works out.

Thanks guys, I should have the stuff this week. I'll let you know how it works out.

Sorry i took me so long to reply with my experience with the windshield weather strip. It worked out pretty well. The parts were great and fit fine. I decided not to remove the windshield molding and just run a small bead of silicone along the edge of the moldings. Then I used a thin but hard plastic putty knife to push it into place. Its two pieces so I set one in place and let the glue dry before doing the other side to make sure there was no shrinkage. There is extra length in it you will have to cut. So after I set the second piece in place, I let that glue dry before making my cut, again to make sure the 2 pieces would butt to each other.
Ideally, you should remove the moldings to make the best fit. But I decided that the time that would take verse the cost of having to buy these parts again if I had to remove the windshield was worth doing it my way.