wire hidind help...... (pics)

[88_GT_5_oh]

wire hiding help...... (pics)

I started doing my wire hiding on the passenger side. I just did a mass air conversion so i left alot of slack in that wire so i could bring it out near the headlights. Anyway, the wire that i am kinda stumped on is the wire that branches off the main harness and goes over the shock tower with the relay that sits by the air box and the connector that goes to the 02 sensors. i don't have the motor in so i don't know exacly how far i can move the harness so i don't have any problems with it being to close to the headers. Does any one have a pic of where they ran this? i tried routing it through the wheel well and ther isn't enough slack and when i can get it connected the inner fender won't go back on. am i gonna have to splice into this wire to make it longer or is there a way to do it? I looked on "almostsotcks" website but i can't get the veiw i want.


this is the wire i am talking about that goes up over the pssenger side shock tower
View attachment 517759

with this relay on it
View attachment 517761

this is the connector thats on the end that goes to the 02's
View attachment 517763

 

[88_GT_5_oh]

just a bump before i go to bed

 

[stang22]

I am pretty sure Paul (ALMOST STOCK) has a picture of it somewhere. He took a picture of everything when he was doing his project. His email address is [email protected].

I am pretty sure the 02 wires run from inside the fenderwell, down the k-member next to the oil pan to the 02 sensors. I did mine a little different though. My 02 sensor wires come through my tranny tunnel. I am sure Paul has some pics though, just email him, but he might respond to this thread.

Tim

Check out Paul's other site as well, I am sure there are some pics in here.

http://www.netsnapshot.com/pcw/b?KEY=7&ACCOUNT=1924

View attachment 517755

 

[89MustangGX]

I don't have any hiding info, but I believe that relay is for your A/C. You may be able to just leave it off if you don't have A/C.

 

[wshI_hd_1]

i just screwed mine into the passenger side fenderwell