Wired fastback

[Spanish Dave]

I am just contemplating re-wiring my 65 fastback .... ie making the looms myself. Any ideas if the connectors are available and if so where from (the ones that go through the firewall etc.) I would like to replace all these rather than cut the existing wires short and connect new wire.
Any suggestions or info would be greatfully received.

 

[slapper]

Personally,I would use an upgraded modern cannon plug connectors if I was taking on that project. However, if you wanted to use the 1960s factory connectors, you could remove the pins from them, clean/inspect and re-pin them with new wires and pins.