Wiring Guys: Enter Please

Saleen0679 said:
If you have voltage at the R/Y then you should have voltage at the BlacK/Orange. Don't know about any Red/Orange wires. Do you have a Tan/White and Brown wires?

Double check for voltage at the Tan/White and the Brown with the lights on.

Another check you can do if you have the switch out is to check the resistance between terminals B2 & R (should be the middle two terminals) on the switch and see if the switch opens and closes the way it should.

Im sorry, I meant Black/Orange. My fingers got ahead of myself on that one.

I had the brown and other wires and those had no voltage with the switch on. I was using a test light. I'll check them again tomorrow just to make sure they didnt light up anything.

On checking the resistance, do you mean use a voltmeter and check it? Thanks
 
If you have a meter you can check the continuity of the switch contacts by setting the meter up for a resistance measurement and watch for the switch contacts opening and closing. It would just be a way to check for switch operation out of the circuit.

If you have no voltage on the T/W wire at the switch then you need to go back and check for voltage at fuse #4. It may end up being a lost connection at the back of the fuse box.
 
Got them fixed. Thanks guys, found out the connector at the fuse box had slid out of its position and the fuse wasnt touching. Im so happy it was something so small, took me a long time to find it but everything seems to be working. Its starting to rain again so I cant play with it..just happy and relieved thats all it is. Thanks again everyone.