Saleen0679 said:If you have voltage at the R/Y then you should have voltage at the BlacK/Orange. Don't know about any Red/Orange wires. Do you have a Tan/White and Brown wires?
Double check for voltage at the Tan/White and the Brown with the lights on.
Another check you can do if you have the switch out is to check the resistance between terminals B2 & R (should be the middle two terminals) on the switch and see if the switch opens and closes the way it should.
Im sorry, I meant Black/Orange. My fingers got ahead of myself on that one.
I had the brown and other wires and those had no voltage with the switch on. I was using a test light. I'll check them again tomorrow just to make sure they didnt light up anything.
On checking the resistance, do you mean use a voltmeter and check it? Thanks