Ok so tonight I finished up my wiring for the car. I was trying to test it out by turning the key over to engage the starter.
When i turned the key nothing happened. So my dad mentioned something about the Neutral Safety Switch, which i didnt think i had wired up. So we decided to just try to ground them out or w/e. We stick a bolt into the gray connector with 4 prongs.
I turned the key and the starter kicked over and started trying to crank the motor up, i turned the key off and took it out of the ignition and the starter kept cranking.
This is my problem, i don't know why it did that. I took some pictures of the plugs, and i also wanted to know what the plug is that plugs right next to the speedo cable?
Thanks for the help!
-AJ
When i turned the key nothing happened. So my dad mentioned something about the Neutral Safety Switch, which i didnt think i had wired up. So we decided to just try to ground them out or w/e. We stick a bolt into the gray connector with 4 prongs.
I turned the key and the starter kicked over and started trying to crank the motor up, i turned the key off and took it out of the ignition and the starter kept cranking.
This is my problem, i don't know why it did that. I took some pictures of the plugs, and i also wanted to know what the plug is that plugs right next to the speedo cable?
Thanks for the help!
-AJ